power

[coupecop]

I have two questions i hope some one can help i have a 92 coupe car that has gt-40 heads of a cobra bored out , gt-40 intake,70 tho,65 mas air ,24 # inject e303 cam 3.55 gears out back and a 255 foul pump .its only making 254rwhp and 296 torq does that sound right.

 

[donsbad68]

sounds close

 

[DMAN302]

sounds pretty much in line with others...'bored out' really doesn't mean anything...were they poted/polished? What was the condition of the heads? What are the flow numbers post porting?

 

[rd]

That's not bad for rear wheel power. There might be some more in there with some tuning. You are at close to 300 hp at the flywheel. A car at 2900 lb or so, running say, 12.90's to 13.10's is only making 275 hp at the wheels or so, per the common calculators. You should be right there.

 

[tonys88lx]

i dunno , seems a litle low to me, get that thing tuned and u should pick up some more power, i thinking you should be in the 275 range and 325 torque .

 

[coupecop]

the car has been tuned already twice i now i should have more but i dont now what else to try its got 18* timming on it

 

[QDRHRSE]

The type of Dyno makes a big difference. For example, a Mustang Dyno could read as much as 10-15% low. Lets start fresh. What kind of Dyno was used?

 

[coupecop]

it was a dynojet :SNSign:

 

[foxbody88stang]

Is your 18 degrees initial or total?

 

[coupecop]

total

 

[coupecop]

it was a mustang dyno

 

[enyawix]

sountds low i have simmler setup getting 289hp 317tq