Pypes Hfm23 H Pipe

F

frodin1

Member

Aug 10, 2011

36

0

6

Apr 21, 2016

#1

• Apr 21, 2016

• #1

Just wondering if anyone on here has hooked up the pypes H pipe to their stock cats? I read the flow only slightly less than the high flow cats in the HFM26 kit. Im guessing im going to have to do some cutting, but no big deal if I can save 200 bucks.

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

Apr 21, 2016

#2

• Apr 21, 2016

• #2

Just curious but...what would be the point of that? It's a 2.5" H pipe, you already have 2.5" H pipe.

 

F

frodin1

Member

Aug 10, 2011

36

0

6

Apr 24, 2016

#3

• Apr 24, 2016

• #3

My h pipe is damaged. Im just going to go with the HFM26 and get new cats as well.

 

F

frodin1

Member

Aug 10, 2011

36

0

6

Apr 24, 2016

#4

• Apr 24, 2016

• #4

If anyone has a sound clip of the pypes hfm26 with the cats on Id like to hear it. Theres enough on youtube but none with the highflow cats on that I could find? I frequently go over to cali so I need to make sure im not going to draw to much attention.

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

Apr 28, 2016

#5

• Apr 28, 2016

• #5

This is my car with high flow cats on the stock H pipe. Same thing as what you're doing though.
View: https://www.youtube.com/watch?v=cC-n9Wv3JrI

 

F

frodin1

Member

Aug 10, 2011

36

0

6

Apr 29, 2016

#6

• Apr 29, 2016

• #6

Definite difference in sound. I have a question, I have the violator mufflers, and I didn't install them. The problem is they're sitting about an inch off center and it doesn't look to be anyway to move them over to center does anybody have any suggestions? Apparently the pypes hangers are stock, so Im wondering if I need to bend the hangers or what? I really dont want to bust out the die grinder and welder. I've seen a ton on youtube and they are all hanging perfect? Let me know what you did?

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

Apr 30, 2016

#7

• Apr 30, 2016

• #7

Pypes are, unfortunately, notorious for bad fitment. Most likely you will have to bend the hangers to get it to sit where it needs to.

 

Gearbanger 101

Straight Outta Locash

20+ Year Stangneter

Aug 10, 2002

9,457

1,377

234

Ontario, Canada

Apr 30, 2016

#8

• Apr 30, 2016

• #8

Red_LX said:

This is my car with high flow cats on the stock H pipe. Same thing as what you're doing though.
View: https://www.youtube.com/watch?v=cC-n9Wv3JrI

Click to expand...

Your cam phasers sound like they're going to rattle right out of the top end!?!

Better get those changed, pronto

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

Apr 30, 2016

#9

• Apr 30, 2016

• #9

Gearbanger 101 said:

Your cam phasers sound like they're going to rattle right out of the top end!?!

Better get those changed, pronto

Click to expand...

Huh? That video is from 4 years ago.

 

Gearbanger 101

Straight Outta Locash

20+ Year Stangneter

Aug 10, 2002

9,457

1,377

234

Ontario, Canada

May 1, 2016

#10

• May 1, 2016

• #10

Red_LX said:

Huh? That video is from 4 years ago.

Click to expand...

Sure sounds like they're hammering away in that clip?

 

F

frodin1

Member

Aug 10, 2011

36

0

6

May 1, 2016

#11

• May 1, 2016

• #11

Ive concluded I want to go with the pro chamber by MAC. But cant find sound clips of the cut to fit unit vs. manifold direct hookup with the violators on. If any one could steer me the right direction>>>> I like the DEEPER tone on the pro chamber

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

May 2, 2016

#12

• May 2, 2016

• #12

Gearbanger 101 said:

Sure sounds like they're hammering away in that clip?

Click to expand...

I don't understand what you can even hear in that video that sounds like a bad phaser.

 

Red_LX

I’m not much help unless you’re looking for ****!

Founding Member

Nov 29, 1999

5,896

73

129

Morgantown, WV...where couches meet their doom

May 2, 2016

#13

• May 2, 2016

• #13

frodin1 said:

Ive concluded I want to go with the pro chamber by MAC. But cant find sound clips of the cut to fit unit vs. manifold direct hookup with the violators on. If any one could steer me the right direction>>>> I like the DEEPER tone on the pro chamber

Click to expand...

Pro chamber with high flow cats and same mufflers as above. It's the only clip I have. The off road one is really loud, obviously.
View: https://www.youtube.com/watch?v=syBbTIkQefo