ok guys i am collecting my parts to finish off the power side of the car before i start on the body
what blow-througth maf meter do you guys recommend
atm i have the folloing parts waiting to be installed on the car
paxton fmic
60# injectors
vortech-mini race bypass
8-rib 2.95 vortech pulley
8-rib 10% od crank pulley
if i am correct the cobra stock pumps/tank and bap should keep the fuel side happy up to 600rwhp
but i am going to up grade the fuel line from the tank to the rails to a -8 line
i hope this last combo of parts puts me deep in the 500rwhp range...
also i think i can use the same belt 6-rib
(stock crankpulley 6.5" and vortech pulley 3.6"(6.5+3.6=10.1))
(new crankpulley 7.15" and vortech pulley 2.95"(7.15+2.95+=10.1))
what blow-througth maf meter do you guys recommend
atm i have the folloing parts waiting to be installed on the car
paxton fmic
60# injectors
vortech-mini race bypass
8-rib 2.95 vortech pulley
8-rib 10% od crank pulley
if i am correct the cobra stock pumps/tank and bap should keep the fuel side happy up to 600rwhp
but i am going to up grade the fuel line from the tank to the rails to a -8 line
i hope this last combo of parts puts me deep in the 500rwhp range...
also i think i can use the same belt 6-rib
(stock crankpulley 6.5" and vortech pulley 3.6"(6.5+3.6=10.1))
(new crankpulley 7.15" and vortech pulley 2.95"(7.15+2.95+=10.1))