?`s about cams for npi

9

98MACH1R

I wanna put it in so bad, please help.

Jun 6, 2005

131

0

0

Nov 16, 2005

#1

• Nov 16, 2005

• #1

i have the pi intake swap coming with the plates and im getting my npi heads ported and polished with a 5 angle job,new valves,and everything, now should i go with pi cams or should i go with something else, any recomends? i want some more top end and because have a 100 shot with 3.73`s, and one more will i need a tune or something special since that is a lot of air being flowed? and with all this will it produce more #`s than a pi swap?

BTW please i dont wanna hear about that i should of just did the pi swap:Zip2:

 

98blackmagic

New Member

Jun 2, 2005

386

0

0

wouldnt you like to know

Nov 16, 2005

#2

• Nov 16, 2005

• #2

How about custom grinds since you have NOS and the PI intake?

 

9

98MACH1R

I wanna put it in so bad, please help.

Jun 6, 2005

131

0

0

Nov 17, 2005

#3

• Nov 17, 2005

• #3

bump

 

DropTopPony

Noob Slayer

Founding Member

Aug 13, 2002

2,570

3

48

south jersey

Nov 17, 2005

#4

• Nov 17, 2005

• #4

call comp cams and tell them what you just told us! They don't charge anymore for different grinds. And the comp 265h is a good NPI cam if you don't want to call.

 

STANGateURlilSS

Founding Member

May 2, 2002

716

0

16

USA & SANDBOX

Nov 17, 2005

#5

• Nov 17, 2005

• #5

98blackmagic said:

How about custom grinds since you have NOS and the PI intake?

Click to expand...

the best way to make power is always with a custom grind.. that is made just for your application.. i would give comp a call.. and ask what they say..

 

M

Mel96GT

New Member

Aug 31, 2004

255

1

0

San Diego

Nov 17, 2005

#6

• Nov 17, 2005

• #6

The PI cams are a cheap way to get some top-end. They will tach to about 5700+ rpms but the low-end will be almost the same. However, if price is no object go with a set of custom grind cams.

 

O

o0akoni0o

New Member

Oct 26, 2004

175

0

0

Fremont, CA

Nov 18, 2005

#7

• Nov 18, 2005

• #7

just curious why you're not going with the pi heads since you're going to be spraying. i mean p&p npi heads are gonna flow just as good as pi's, but the juice will love the high compression.

 

T

TGJ

New Member

Mar 30, 2005

1,049

4

0

Nov 18, 2005

#8

• Nov 18, 2005

• #8

The Comp 262 AH cam( PI 262 ) grind would work real well for you. You would need Comp or Crower springs to run that cam.

You could go with the Comp 268 cam( NPI ) grind as well but I think you would be happier with the 262's.

 

T

TGJ

New Member

Mar 30, 2005

1,049

4

0

Nov 18, 2005

#9

• Nov 18, 2005

• #9

Also you would need to get the car tuned. You would make more power than a PI swapped car.