• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

setting up for more boost

  • Thread starter Thread starter powernexcess
  • Start date Start date Dec 16, 2007

powernexcess

New Member
Aug 21, 2005
24
0
0
joplin, mo
Dec 16, 2007
#1
  • Dec 16, 2007
  • #1
I have the cheap vortech sc kit that puts out 5-6 psi. I want to put an 7 inch lower pully which ads around 3 psi depending on diffrent situations. My kit did not come with a bypass valve. What are the installation procedures and the best place to get the bypass valve. Just looking for suggestions I'm sure theirs lots of guys that have done this.

Also I'm not seeing any crankpressure issues at the moment, but with more boost what precautions do I need to take. Besides what came in my kit.

thanks for your help!
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Dec 16, 2007
#2
  • Dec 16, 2007
  • #2
on my engine, my out-of-box SC trim make 5 psi, i added a UPR boostmaster pipe and it make 6 psi.

put the 7 inch crank pulley and it made 9 psi, would spike 10 psi on a cooler day.,

my kit didnt come with a bypass either, what i did.

the upr boost pipe has a big nipple on it for a bypass valve. i didnt want to buy the alum discharge tube, so i went to the hardware store and found a big barb fitting that i could fit a 1 inch heater hose on., i drilled a hole into the bottom of the plastic inlet tube and used some epoxy on the fitting and threaded it in the hole and its very strong. i bought a standard bosch bypass valve off ebay for like 80 bucks (same one the s trim kits use)

i bought like 3 foot of 1 inch rubber hose and plumbed it all up. i had to make a small 180 turn tube out of aluminum. the nipple on the UPR almost faces towards the front of the car, i couldnt get the hose to make such a sharp turn without folding and pinching up.

it worked great, doesnt compressor surge anymore and it drive a bit better. well worth it, espcially if your planning on more boost. i added mine with 5-6 psi and never looked back.

my engine had crankcase pressure issues, i would always blow the dipstick out. i just capped off the PCV valve (making it useless) and ran an open breather, solved my issues.
 

powernexcess

New Member
Aug 21, 2005
24
0
0
joplin, mo
Dec 16, 2007
#3
  • Dec 16, 2007
  • #3
foxfan88 due you have and pictures of this by chance
 
You must log in or register to reply here.

Similar threads

Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
491
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
Forced Induction Vortech bypass valve necessity
  • 92Rustang
  • Aug 28, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
625
Fox 5.0 Mustang Tech Sep 2, 2024
Cheapskate207
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
749
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?