Snow Boost Cooler..The Newest Addition

eades5.0 said:

Cheap alt. to a intercooler

Click to expand...

what boost levels are you running? since your on a s/c setup im gonna guess and say less than 15 psi, which puts just about any junkyard intercooler at your desposal. Why not have both.

i was just saying, with just about any i/c at that boost level you will see more than a 50* drop, without refills. Now, hand in hand those water/alky injection + i/c is where the power is at. Remember Boost is your friend until it gets hot...
What is your setup? forged bottom end?

Thats awesome Ive been throwing around the Idea of adding a methanol/water kit to mine as well insted of taking the Intercooler route since there so expensive anyway. From what there claming out of these kits its well worth the $300 , be sure to keep us updated on the install process and when you get some results from it.

Also the only pics that I have seen w/ this kit or another one like it have been w/ the resivior bottle being where the battery is, is that pretty much the only place we can mount the bottle

thats cool i want to be on the list of people you tell your results too. i need a way to cool mine down too, as i see 15lbs when the belt is tight, which hasn't been for a while.

Chris,

That is awesome. Should really see some good numbers. The only problem will be that even with your radio in the off position your gonna hear that famous song playing in your head:


"Bye, Bye, Bye, T-5"

Thats cool but I thought you were the one that wanted to try out AFMs water meth kit?

onebad95 said:

"Bye, Bye, Bye, T-5"

Click to expand...

The good ole boys were drinking wisky and rye, this will be the day that I die.

I think he already got one of the new tremecs...so he should be covered...results should be cool =)

Yeah chris is not running a T5 anymore. And chris I knew you listen to me. JUST BUY IT!

Dustin

Whats the difference between the different stages from the snow kit?

eades5.0 said:

The Stage 1 has a 140 psi high volume pumpand a adjustable boost pressure switch where the Stage 2 has a upgraded 140psi pump for incredible atomization 220psi in over 500HP applications. Also a Variable Controller that varies the quantity injected vs. boost (Instead os just a boost pressure switch like in the Stage 1). This allows maximum power at all RPM/boost levels as just the right amount is injected at all times. You have adjustments for onset boost level and full quantity boost level. The variable controller replaces the boost pressure switch and relay included in the stage-1 kit.

Hope that helps

Click to expand...

Yup, pretty much what he said. In higher boost aplications you need more pressure to atomize your mixture. In some cases with weaker pumps , they are barely able to overcome the pressure in the manifold, but that is like stated, higher boost setups.

Whats up eades been awhile. Where is the reservoir located in your ap. Can u use the windsheild wiper reservior? For a clean look?

Just some tidbits for anyone interested...

As eades5.0 knows, I recently installed the Snow Performance Stage 1 kit and I am very pleased with it. I also had originally wanted to try the AFM kit, but the more I looked at it, the more CHEAP (as in JUNK) it looked. The Snow kit came in a very complete kit with decent installation instructions as well as some tuning tips. I did the install in about 2-1/2 hours. My car is an 89 GT, but install is pretty generic and straightforward IMO. My car's no feature car like my yellow 94 was, but here's some install pics on my webpage: http://home.comcast.net/~rel3rd/wsb/html/view.cgi-home.html-.html

Simply click on the PHOTOS link and they're on like the 4th or 5th page...

As for it's benefits, I have ran as high as 31* total timing with my 12psi of overspun (and superheated) A trim boost. My first road test with the kit I experienced a blown set of head gaskets due to the kit shutting off at WOT (5000+rpm's, 31* total timing and 12psi of boost) This was my fault partially because I had a bad wiring connection that I rushed using a "scotch-lock" connector instead of my soldering gun...rookie mistake on my part as I KNOW better! I also had a set of warped heads from previous (pre-injected) head gasket issues. Even so, until the kit stopped spraying, there was no detonation whatsoever, and the car definitely felt stronger with the 10* higher timing!

Anyway, the heads have since been milled .010" to ensure their flatness, and all injection wiring has been soldered so I am pretty confident that I'll experience no more issues. All I need now is some nerve to start advancing my timing back up to my previous methanol injected setting of 31* total (or more), instead of the present 21* total.

FWIW, eades5.0 mentioned that he sees 200* air discharge temps...yestreday with my newly swapped S trim head unit and 13psi of boost, I saw 112* for my hottest IAT reading on my PMS handheld monitor. I want to disable the Snow Boost Cooler and get a non methanol injected IAT reading as soon as possible, just to see how much of a temperature drop I am truly seeing. As it is, I see usually about 140* just cruising around unboosted, so I'd say without a doubt I'll see a large temperature difference between a WOT uncooled and a WOT methanol cooled blast down the road...

BTW...right now I am running run of the mill Wal Mart brand Windshield Washer fluid in the methanol reservoir and it works fine, just like Matt Snow and Tim Stockwell told me it would. I did pick up some actual methanol at the race track yesterday though and will try that soon.
Hope this helps...

rel3rd said:

All I need now is some nerve to start advancing my timing back up to my previous methanol injected setting of 31* total (or more), instead of the present 21* total.

Click to expand...

Well...against my better judgement, today was a nice overcast and cool day, plus I was off work today anyway, so I did some Snow Boost Cooler testing. I managed to bump up the total timing to as high as 29*, up from 21* max without the methanol, and experienced no detonation at all. I did get some "tip-in detonation" (at about 3000 rpm's) but that was easily tuned out by adding a little fuel in the PMS "ACCEL" menu...I'm sure it will take more timing and so far it's pulling harder everytime I add a few degrees of timing.

eades5.0: You can check later on stangtuning.com to see how I am making sure I'm much safer tuning this time around.