Soft Touch, Line Lock, 5spd..

gearheadboy

15 Year Member

Jan 15, 2003

1,425

177

84

Greencastle Pa

Mar 26, 2013

#1

• Mar 26, 2013

• #1

So I have a new line lock to install. Haven't gotten to it yet. I do not have nor do I want an MSD on this car. I am looking to make it a fun driver and occasional weekend track star. So what I was thinking was about adding an MSD soft touch rev limiter to leave on. Maybe rig it to the clutch switch? Then I started thinking about that line lock...maybe a 2 step.. I have a 5 spd car. I will have a line lock. WHAT DID YOU DO? Any ideas on what would be a good set-up?

 

marks89

Member

Sep 26, 2012

32

4

19

oklahoma panhandle.

Mar 26, 2013

#2

• Mar 26, 2013

• #2

Im running a two step into clutch switch but i am running 6al box. line lock off by itself.I dont leave the line with line lock.

 

srtthis

the guy doing it does every local racers rear end

15 Year Member

Jul 3, 2009

5,129

1,666

204

Maryland

Mar 27, 2013

#3

• Mar 27, 2013

• #3

im running a 6AL2...

button on the shifter to the 2 step. im going to rewire it to be tied to both the clutch switch and the button. so i have to hit the button with the clutch in for it to come on. but once i hit the button i can let go of it

 

84Ttop

They make new pistons every day, so why worry?

5 Year Member

Jul 2, 2009

5,222

3,254

204

South Jersey

Mar 27, 2013

#4

• Mar 27, 2013

• #4

Same as the others, tie it into the clutch switch. I personally would never run a 2step with the stock balancer though. We all know that the rubber falls out of them all on their own and a 2step would only speed that process up and when it does go south, bambalamb cracked block..woops, don't ask me how I know, lol. Any decent aftermarket balancer and you're golden

 

marks89

Member

Sep 26, 2012

32

4

19

oklahoma panhandle.

Mar 27, 2013

#5

• Mar 27, 2013

• #5

Ought oh! I may be in trouble, don't want to sink money into the 302 but 347 wont be done till end of year.

 

F

fox bodies rule

Member

Mar 11, 2008

19

2

14

Mar 30, 2013

#6

• Mar 30, 2013

• #6

I'm running a 6AL-2 and the Ricks Switch setup on the shifter and clutch, great setup

 

gearheadboy

15 Year Member

Jan 15, 2003

1,425

177

84

Greencastle Pa

Mar 30, 2013

#7

• Mar 30, 2013

• #7

Thanks for the replies. I guess I'm gonna do the clutch switch thing like I thought I would. I just wanted to feel out what other trick ideas people had.