Steering wheel install

[Potomus Pete]

Removed clockspring and saved it. I made a seperate horn button. Although I could have done it but Im lazy. L bought the hub because its sweet looking. You will have a gap between that I filled with a piece of sound deadner

 

[Blueinfan]

Removed clockspring and saved it. I made a seperate horn button. Although I could have done it but Im lazy. L bought the hub because its sweet looking. You will have a gap between that I filled with a piece of sound deadner

Which hub did you purchase? Was it the momo one like the one I bought? How did you connect your horn button?

 

[Potomus Pete]

L got the Momo hub, and dont remember how I hooked up the horn. My horn is a button next to my radio. I had trouble with the horn.

 

[mikestang63]

NICE!!!!
hahaha - I'm trying to install mine.

Am I missing something? Do I have the right after market hub?

How did you get the horn to work?
What wires were spliced?
Did you remove the CLock spring?

The NRG adapter I bought allows you to keep the clock spring
The one you bought you have to either remove or alter it as per the earlier posts

I believe I simply connected the purple wire off my clockspring to the horn button. but mine is a 90. The alternative method is to connect to the yellow/green wire on the column and run a wire to the horn button. This also was outlined earlier in this thread.

 

[Blueinfan]

The NRG adapter I bought allows you to keep the clock spring
The one you bought you have to either remove or alter it as per the earlier posts

I believe I simply connected the purple wire off my clockspring to the horn button. but mine is a 90. The alternative method is to connect to the yellow/green wire on the column and run a wire to the horn button. This also was outlined earlier in this thread.

okay, was the NGR adapter also mentioned?

 

[Mustang5L5]

Lol i'm still confused