Slow5o New Member Feb 11, 2010 9 0 0 Spartanburg, SC Feb 16, 2010 #1 Feb 16, 2010 #1 I have a 2000 Gt40 motor with Tfs1 cam longtubes 70mm tb and 30lb injectors i want to run a pro charger or vortech at about 10lbs would it make a difference to change the heads and intake manifold or would the gt40 work fine
I have a 2000 Gt40 motor with Tfs1 cam longtubes 70mm tb and 30lb injectors i want to run a pro charger or vortech at about 10lbs would it make a difference to change the heads and intake manifold or would the gt40 work fine
tannerc91gt This last 25% is foreign territory at this point Founding Member Nov 29, 1999 4,392 2,967 234 Indiana Feb 16, 2010 #2 Feb 16, 2010 #2 Obviously you can make more power with aluminum heads and a better intake...
Slow5o New Member Feb 11, 2010 9 0 0 Spartanburg, SC Feb 16, 2010 #3 Feb 16, 2010 #3 They only flow about 56cfm more which will probly make a bit of difference
tannerc91gt This last 25% is foreign territory at this point Founding Member Nov 29, 1999 4,392 2,967 234 Indiana Feb 16, 2010 #4 Feb 16, 2010 #4 What intake heads are you comparing them to?
tannerc91gt This last 25% is foreign territory at this point Founding Member Nov 29, 1999 4,392 2,967 234 Indiana Feb 16, 2010 #5 Feb 16, 2010 #5 Are you using gt40 iron heads or is it a crate motor with x heads?
Slow5o New Member Feb 11, 2010 9 0 0 Spartanburg, SC Feb 16, 2010 #6 Feb 16, 2010 #6 Iron heads i found a flow chart on intakes and heads im comparing them to trickflow
