T56 in a fox?

[393windsor]

I search the threads but couldn't find it. Does anyone know what it takes to put a T56 tranny in a fox cuope behind a 351w Any help would be greatly appriciated

 

[Darkwriter77]

Different bellhousing, pilot bearing, and crossmember (or perhaps modify your current one)... plus the shifter may (or may not) sit back a bit farther, since the SN95's T-5 trannies are like that.

 

[393windsor]

Different bellhousing, pilot bearing, and crossmember (or perhaps modify your current one)... plus the shifter may (or may not) sit back a bit farther, since the SN95's T-5 trannies are like that.

would you happen to know which different bellhousing, pilot bearing, and crossmember

 

[PJB]

www.danddperformance.com

 

[393windsor]

thanks for the info, quite expensive though

 

[89-347-LX]

diffferent driveshaft too?

 

[bcmbcmbcm]

diffferent driveshaft too?

yep.

the dd kit is expensive but also reasonable when you consider what you are getting...everything including the driveshaft.

 

[PJB]

I think the driveshaft is shorter than stock.

 

[TokyoJoe]

yep, length is different.

Here's another link if you plan to make some real power

http://www.gforcetransmissions.com/tran_gt-56.asp

 

[6SpeedLX]

I search the threads but couldn't find it. Does anyone know what it takes to put a T56 tranny in a fox cuope behind a 351w Any help would be greatly appriciated

you obviously didnt search hard enough, this has been covered at least 10 times...

 

[393windsor]

you obviously didnt search hard enough, this has been covered at least 10 times...

thanks for the patience and help everyone
6speed did you have to reply if thats all you got to say is something negative