Progress Thread The Ragged Gt Thread-little To No Progress Made-Garage Art

[CarMichael Angelo]

Gotta also remember the SN computers are more finicky than foxes as well.

Just not as finicky as the ones at Nicks house...none of them bitches work worth a damn..Stupid techno-junk!!! Let's bring back the carburetor! Now there's a contraption even a caveman could work on.

* Turok to Thag.." Engine in car run bad" ..Thag say, " Beat on with club, it fix" Turok say "Try that already, engine still run bad"
Thag say "Turn screw on carb .. it run good then... Uggh?"
Turok say "Uggh"

 

[RaggedGT]

You are the man Nick-
These where in my mailbox today

I can’t thank you enough for your generosity
@95BlueStallion

 

[RaggedGT]

I ran that cam for years. Always ran a little rich no matter what I did.

Gotta also remember the SN computers are more finicky than foxes as well.

It’s always run a bit rich with that cam in the past-but right now ,it’s unbearable anywhere past the door lol

 

[95BlueStallion]

Glad to see them go to good use brother.

 

[RaggedGT]

Drove the car around the neighborhood today- shifts through all the gears
Idle is still a bit wonky,and it kinda acts like it wants to lug until it downshifts-but I’m thinking some more tinkering and it will be ok

 

[95BlueStallion]

Good deal man!

 

[RaggedGT]

So today I did a thing (or two lol.)
In reference to the Great @hoopty5.0 -
I put a “Dik on the Fish”

Thanks again @95BlueStallion -I can’t say thank you enough.
I messed around with putting the tower brace and a few other things back on, messed with the idle etc. hoping to insure and tag it next week,so I’ll tinker around until then

 

[95BlueStallion]

They are better than old junky wires, that’s for sure!

 

[hoopty5.0]

Hey man, sometimes you gotta go for function before you can tackle form. Good job!

 

[RaggedGT]

For prosperity ,and to stay in good standings with the church-it’s time to knock the dust off this Mf’er
There have been several highs and lows over the last month or two. Mostly being I could never keep the idle happy. Either it would idle fine in park and surge in gear, or not idle at all. So I gave up.. Then the unexpected happened- my beloved beater DD F150 spun a rod bearing
So I turned my attention back to the mustang- idles and run beautifully-with the spout connector out. Runs like ish with it in-still working on that.
Has periodic moments of running warm-going to change the thermostat and try some water wetter
Car had made two 70 mile round trips to work and has done very well, other than getting a bit warm. Hopefully the thermostat fixes that cause everything else is newer

For the record-the Transgo shift kit is pretty sweet, aggressive without being annoying-takes the slush outta that slush box lol

 

[RaggedGT]

Figured out my overheating problem. Fans come on sometimes. But not every time-or really when they should-I’m guessing my ccrm died (again) soooo... anyone selling a ccrm for a 94 Mustang?

 

[5.0Droptop]

Figured out my overheating problem. Fans come on sometimes. But not every time-or really when they should-I’m guessing my ccrm died (again) soooo... anyone selling a ccrm for a 94 Mustang?

wire them on a relay that come on with key. let em run all the time.

 

[hoopty5.0]

wire them on a relay that come on with key. let em run all the time.

This is what I did on my truck. Orielly relay and no issues.

 

[RaggedGT]

wire them on a relay that come on with key. let em run all the time.

This is what I did on my truck. Orielly relay and no issues.

How did you guys wire the fan up?

 

[hoopty5.0]

Single speed, direct to the relay. It had hi/lo leads, just had to figure out which was which and hard wire it. It also has a 40a fuse inline between the battery and relay.

 

[Adieu]

How did you guys wire the fan up?

Amazon product ASIN B004XONWU4View: https://www.amazon.com/Derale-16763-Electric-Relay-Harness/dp/B004XONWU4/ref=sr_1_2?gclid=EAIaIQobChMI0MyJy6PI4wIVQb7ACh1fegOSEAAYASAAEgKBO_D_BwE&hvadid=234000604994&hvdev=c&hvlocphy=1026831&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=17462781001245461718&hvtargid=kwd-305962664052&hydadcr=5709_9590312&keywords=derale+fan+relay&qid=1563789973&s=gateway&sr=8-2


This is what I used on ElSuperPinto. You can buy all the individual pieces for less (and I've gone that route in the past), but that kit is foolproof, complete, and well made.

 

[RaggedGT]

@Mustang5L5 -just in case you thought I forgot- I did lol.
New bulbs, swapped the lens over and finally installed my white face gauges

 

[RaggedGT]

ok guys, looking for a CCRM and an Instrument cluster.. 1994 mustang- tell your friends

 

[Adieu]

ok guys, looking for a CCRM and an Instrument cluster.. 1994 mustang- tell your friends

Wait? No fire?

 

[RaggedGT]

Wait? No fire?

That was a while ago homie- Catch up....