• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

throttle body size for this application?

  • Thread starter Thread starter Pinebluffracer
  • Start date Start date May 7, 2006
P

Pinebluffracer

New Member
Jan 25, 2006
33
0
0
May 7, 2006
#1
  • May 7, 2006
  • #1
I am curious what size tb is best for my current application. There is a gt40 intake, Trick Flow heads, including valve train and new higher compression forged pistons. There is almost 10 : 1 compression. When changing this, do I need to consider changing the mass air flow? Should they be equal in size.
 
P

Pinebluffracer

New Member
Jan 25, 2006
33
0
0
May 7, 2006
#2
  • May 7, 2006
  • #2
Oh.. forgot to mention... It is a 306 with an E cam and free flowing exhaust from Head to tail pipe.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
May 7, 2006
#3
  • May 7, 2006
  • #3
Mass Air should be a little bigger than throttle body. I believe the GT40 intake uses a 65mm opening so that should suffice though putting a 70mm shouldn't hurt it but any bigger is useless. I run the GT40's cousin the explorer intake with a 70mm TB. I'm about to upgrade my mass air
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
May 7, 2006
#4
  • May 7, 2006
  • #4
HoodStrype said:
Mass Air should be a little bigger than throttle body. I believe the GT40 intake uses a 65mm opening so that should suffice though putting a 70mm shouldn't hurt it but any bigger is useless. I run the GT40's cousin the explorer intake with a 70mm TB. I'm about to upgrade my mass air
Click to expand...

GT-40 has a 70mm opening. I have pretty much the same setup and Im going for a 70mm TB.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
May 8, 2006
#5
  • May 8, 2006
  • #5
70 or 75mm should be fine. If it was my car, i'd go 75mm and match the gt40 inlet with a dremel.
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
May 8, 2006
#6
  • May 8, 2006
  • #6
There isn't anything drastic with your engine combination (based largely on the E cam specs). Unless more displacement was in the future, 70 would probably be your best bet. Just because you may have big parts that may say "go-fast" a N/A engine is only going to take in what the camshaft allows it to............
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,076
1,659
194
NJ
May 8, 2006
#7
  • May 8, 2006
  • #7
Use a 65 or 70.
75 is too big.
 
You must log in or register to reply here.

Similar threads

5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
189
The Welcome Wagon Jul 3, 2026
5150K
5
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
G
Fuel Stock 1994 5.0 throttle body size
  • GOvert
  • Mar 15, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
5K
Fox 5.0 Mustang Tech May 1, 2025
95gt1985
9
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?