I'd at least look into it. Mine works awesome.You can use the stock VSS sensor on the speedo for the rear wheel speed, and then just add one to the front wheel. Compare the trans output shaft speed to the front wheel speed in the MS3 and bingo, traction control. I'm going to try the method @nicholase mentioned first though and see if I can make that work the way I want.
Like most things there's old school methods and more modern approaches.
I'd research what it uses as inputs. If its similar to mine it should have inputs for RPM and VSS. It should also have your transmission gear ratios entered and final drive. This way it knows actual vehicle speed and what gear you're in. Lastly it would use code to determine actual vehicle speed even when the tires are slipping. That makes it work really well to dial in heavy ignition retard in first gear and taper off as vehicle speed increases and you shift through the gears.
I know we're talking about different management systems here, but if you or anyone is curious how modern ringless TC can work its on page 61-65 of the resource I uploaded. It might give some insight on if the MS setup is similar or not.
https://stangnet.com/mustang-forums...e-management-system-install-instructions.111/
Re reading the screen shot I posted it might be a different style setup from what I'm using.
Last edited: