Tremec TKX

[Sparky714]

So I'm thinking about doing a T5 to TKX swap in my '89. What all would be needed for the swap? Looks like a different bell housing and 26 spline clutch for sure. Do I need a different yoke and trans mount? What about clutch fork setup and will my aluminum drive shaft still fit? Any help or advice or reviews on the new TKX appreciated.

 

[Monkeybutt2000]

You'll need the 31 spline yoke for the driveshaft. The stock arm works,it's a little short but works. Other than the things you listed that's it unless you wanted an aftermarket shifter.

 

[nickyb]

I belive they come with an aftermarket shifter,and stock mount needs modifying or get a stifllers,
American power train has great videos and lots of info.

 

[Monkeybutt2000]

I belive they come with an aftermarket shifter,and stock mount needs modifying or get a stifllers,
American power train has great videos and lots of info.

They come with a "Tremec" brand shifter.

 

[90sickfox]

If you go this route contact Hanlon Motorsports. Bob did a fantastic job on my tko600. If you call they can include everything you need in a package deal. That's what they did for me. Everything I needed for the swap came directly from them. They should have the TKX in stock.