I recently bought a cam off ebay. The seller listed it as the eddy performer rpm 7122. However today when i called edelbrock they said they did not recognize the cam numbers.
if the cam end were viewed as a clock the numbers 112853, and directly under 260880.These are at 12 oclock.
at about 9 oclock the numbers 252912
and at 6 oclock it says USA
This is the end of the cam that the timing chain bolts to.
Any help would be greatly appreciated and rewarded.
Thanks
Where someone posted this:
"That's an edelbrock flat tappet rpm cam part#7122 the specs are 224/234 duration 496/520 lift and 112 lobe separation. Go to CJ Pony Parts - Ford Mustang Parts and look it up by the part#EDL7122."
I recently bought a cam off ebay. The seller listed it as the eddy performer rpm 7122. However today when i called edelbrock they said they did not recognize the cam numbers.
if the cam end were viewed as a clock the numbers 112853, and directly under 260880.These are at 12 oclock.
at about 9 oclock the numbers 252912
and at 6 oclock it says USA
This is the end of the cam that the timing chain bolts to.
Any help would be greatly appreciated and rewarded.
I recently bought a cam off ebay. The seller listed it as the eddy performer rpm 7122. However today when i called edelbrock they said they did not recognize the cam numbers.
if the cam end were viewed as a clock the numbers 112853, and directly under 260880.These are at 12 oclock.
at about 9 oclock the numbers 252912
and at 6 oclock it says USA
This is the end of the cam that the timing chain bolts to.
Any help would be greatly appreciated and rewarded.