Ever since I got my 95 cobra there has been a difference in the rear wheel gaps. On one side the rear tire sticks out much more than the other. I think it might be close to 2-3 inch in difference. I have purchased new lower control arms. I have not installed them yet. Any of you guys have this problem... How could I fix it.... should it be a problem in the lca's.??
uneven rear end
- Thread starter KasperG
- Start date
Some of the rears seem to be off-set like that - there are different theories floating around.
The LCA's might help, but something along the lines of a panhard bar would be better. Two - three inches does not sound right at all though.
Good luck.
The LCA's might help, but something along the lines of a panhard bar would be better. Two - three inches does not sound right at all though.
Good luck.
smokin95vert
Member
My 95 vert has the same problem but mine is only a 1\4 inch. on the pass. side wheel. i'm going to try upper and lower control arms to see if that fix the problem. If you find a answer to this let me know. Thanks jay:SNSign:
Similar threads
