• Mustang Forums
  • Special Production

Roush upgrading to smaller pully..

  • Thread starter Thread starter mattch2
  • Start date Start date Aug 19, 2005
M

mattch2

New Member
Jan 20, 2003
505
0
0
Niagara Falls
Aug 19, 2005
#1
  • Aug 19, 2005
  • #1
well from what ive been reading over the board for the past few months.. I was wanting to change my pulley to the 65mm chicane one on my series II..Ive heard over and over that you need to upgrade to 42lbs and a 90maf aswell as a svt pump....So today i call joe at chicane to order my ripp kit and we get talkign and i tell him how i want to get teh puley soon but still need the others parts first ..he tell me i will not need the injects or the maf..stock is fine..he said aslong as i have a safe tune i will be fine if i was planning on running like 380 to the wheels yes but it will only be prolly 335 so he says its not a biggy.....just curious what you gusy think..is it in the tune or do i really need those other parts???????
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Aug 20, 2005
#2
  • Aug 20, 2005
  • #2
mattch2 said:
well from what ive been reading over the board for the past few months.. I was wanting to change my pulley to the 65mm chicane one on my series II..Ive heard over and over that you need to upgrade to 42lbs and a 90maf aswell as a svt pump....So today i call joe at chicane to order my ripp kit and we get talkign and i tell him how i want to get teh puley soon but still need the others parts first ..he tell me i will not need the injects or the maf..stock is fine..he said aslong as i have a safe tune i will be fine if i was planning on running like 380 to the wheels yes but it will only be prolly 335 so he says its not a biggy.....just curious what you gusy think..is it in the tune or do i really need those other parts???????
Click to expand...



As long as you are not hoping for more than what Joe told you you would get, you can get away with a pulley ans RIPP kit.

If you really want all you can get out of that blower without porting it, you will defi. want a tune after you go bigger injectors and MAF. At that point your powerflash becomes more junk then it alreday is. Dont worry, I have one too.
 
M

mattch2

New Member
Jan 20, 2003
505
0
0
Niagara Falls
Aug 20, 2005
#3
  • Aug 20, 2005
  • #3
i jjst want more boost and more power than how it is stock...if im safe with just the pulley and tune that is great for me..i can always pick up the injects and maf down the road then re tune it
 

129saleen

New Member
Sep 1, 2004
124
0
0
Houston, TX
Aug 20, 2005
#4
  • Aug 20, 2005
  • #4
I wouldnt risk ruining my sc on listening to joe I would just do what has proven to work...Have a buddy who just got it tuned and two later blew the motor....Just go the safe way and get the extra stuff...
 
S

saleens4

New Member
May 22, 2005
35
0
0
Aug 20, 2005
#5
  • Aug 20, 2005
  • #5
get the mass air meter i had to with my IV kit and stock pulley it was pegging meter. The road to 11.9 is simple if you follow me more to come this fall here in the cool pa air. oneqkgt@aol.com the low key sct tuning guy.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Aug 20, 2005
#6
  • Aug 20, 2005
  • #6
OK.

Here it goes. If anyone is working with the Serires II blower and wants more power it's ALWAYS best to have your new combo re-tuned. Actually, it does not matter which blower, it's always best to re-tune ( even with only a pulley swap ). Life sucks like that and **** happens.


Here is the # one prob with the series I and II Saleen blower. Anyone who owns an S281 supercharged looking into increasing the amount of power they have will almost never be satisfied.

With all of that said, even if you upgrade your blower you will need to re-tune anyway. Add up everything, pulley, new fuel pump, MAF and injectors.
Total that amount. Sometimes it's better to go buy a new blower setup. I think the Seies IV is on sale at Saleen right now. U will still need a pump and MAF.

Everyone drives their cars differently. Some just cruise and some mash the throttle at every light. Once you make any changes to the blower/motor set up you exceed what Saleen intended with the "fisher-price powerflash".
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
S
65 Coupe I6 Auto to 302 EFI 5 Speed Swap
  • Scuderia
  • Feb 3, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
14
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Sep 9, 2025
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?