used GT40P heads

[NIIIIICE]

my buddy has set for sale they have 75,000miles on them, not cracke dor warped, is that too many miles to be adding them to my car, any suggestions
should i replace the seals or the value springs...they both look fine!!!!

 

[SuperDust22]

how much is he selling them for. You can always get the heads new vavle job, springs etc.

 

[NIIIIICE]

140.00....

 

[SuperDust22]

I would say go for it. You could get a new valve job and port them and you will be happy. And get a cam when you are installing the heads.

 

[95snoozer]

i will buy them if you wont, If you decide against them, please PM me and I will make a deal

 

[NIIIIICE]

im going to get them..should i replace the seals and the value springs, or no!!!im using the steeda 19 its lift is only 480 so imt hinking the stock springs should be fine..any comments guys

 

[95snoozer]

buythe trick flow spring set

locks retainers springs and new seals for 129

its good for .542 and has stock install height. you wont ever have float problems with these. You can install them yourself or have a shop do it. they shouldnt sharge you much at all. we did some in like 20 minutes installed with behive springs.

If you find any deals like that please tell me I am looking for a set here in a few weeks after my first pay check

 

[NIIIIICE]

Thanks...i guess for 129.00 it is cheap insurance..can you find the link i cant seem to find this kit..

 

[NIIIIICE]

how about the steeda valve spring and retainer kit..it is 134.99 is it just as good, im using a steeda cam #19, if that matters at all

 

[95snoozer]

they sell it at summit, jegs and lots of places.

 

[mto502]

I thought you bought GT40 heads for that slug last year

 

[NIIIIICE]

I did...you got anything positive too add....shoot me an email [email protected]

 

[mto502]

Nope. Nothing positive to add.