Well, what is your winter project this year?

Kdubslugga · Nov 27, 2010

Yep, time to put em away for the winter, for us Northerners anyways. Just seeing what everybody plans on doin to there ride this winter? All Im adding is Cobra R Calipers front and back and some Zinc coated cross drilled and slotted rotors, 13" and 11.65" Also need to have a bearing replaced on the Vortech. Other than that pretty slow winter

skunk21 · Nov 27, 2010

My ongoing project that will be finished over the winter for spring.

( note: title has my old screen name)

http://www.stangnet.com/mustang-forums/799980-greensvt21s-project-thread.html

85_SS_302_Coupe · Nov 27, 2010

Well if all goes as planned mine is gonna roll out of storage in the spring like a different car...fresh paint, new interior, a few more go fast goodies. I'll just be happy to drive it again.

1987LXragtop · Nov 27, 2010

i have it up on jack stands now. had the wheels rebalanced and tightened up a loose exhaust. While its up I have subframe connectors that I should put on and I started looking at how to run a turbo. Just trying to figure out if Im mentally prepared to dig into another big project.

aar0s · Nov 27, 2010

my car might be getting new rad hoses, AC delete, a new dimmer dial and if i can get the parts a e-fan of some kind.
her car gets a tuner new rear tires and hopefully some body and paint work.

ReefBlueHatch · Nov 27, 2010

So far I have planned to add Strange Engineering shocks/struts, FRPP B springs with new isolators, and MM full length sub frame connectors. I'm hoping it will ride and drive like a whole new car because it all original right now. The SFCs will go one first and then the rest when I get the springs and rear shocks.

281pony · Nov 27, 2010

more boost for my new vortech, magnum 6 speed setup, built rear, paint job and a 4-bolt shortblock.

paint job is halfway done and rear is 85% installed now.

NIKwoaC · Nov 27, 2010

After tax returns, freshen up the stock short block and go H/C/I. Looking to "break the mold" and make a little more than 300rwhp. By little, I mean hopefully a lot. Let's just say the heads and intake I'm looking at would be happy on top of a 347-363 stroker...

Also, the car is getting a 130A alternator conversion as of now. Just need to finish up the wiring. I hate soldering.

SMOKEDYA · Nov 27, 2010

Mine isnt all car project,but mine winter plans are 1:finish getting custody of my daughter.2:get a bigger house.3:finish the turbo and tuned. and yes in that order. peace

john

Shaolin Crane · Nov 27, 2010

Waiting on my tuner, then i can install my exhaust shooting for 600rwhp and 1200rwtq
Fox is getting another 347 with AFR 185 comp ports shooting for 400rwhp
Its been a blessed christmas so far

capri debris · Nov 28, 2010

I hope to get the motor swapped out in my Suzuki Swift and get it back on the road.... can't beat 45 mpg. My Ranger needs a new motor and the Capri needs the interior completed... whew!

NIKwoaC · Nov 28, 2010

Shaolin Crane said:
Fox is getting another 347 with AFR 185 comp ports shooting for 400rwhp
Its been a blessed christmas so far

Dude, screw 185s, go bigger! Also, is that a new truck?

aar0s · Nov 28, 2010

SMOKEDYA said:
Mine isnt all car project,but mine winter plans are 1:finish getting custody of my daughter.2:get a bigger house.3:finish the turbo and tuned. and yes in that order. peace
john

That is a worthy project list, john

Shaolin Crane · Nov 28, 2010

NikwoaC said:
Dude, screw 185s, go bigger! Also, is that a new truck?

Nah man, sold the dart block so im using the stocker. Plus i got a KILLER deal on the new engine. 400rwhp is all i really need for the road course. And yes i got a new truck

srtthis · Nov 28, 2010

re doing my rear suspension right now... rear is laying on the gound. just need to find a impact socket i can get in to get the driveshaft bolts off. just bent the only 12pt 12mm boxend wrench i had

Mustang5L5 · Nov 28, 2010

Redo my fan controller and worrying to a cleaner setup

Convert to mass air

Purchase and install max motorsports stb

Sn95 steering rack conversion

Chrome_Rust · Nov 28, 2010

Get the engine back together, again.. mach 1000 amp and sub install to augment the mach 460 in there now, Cobra front brakes, New 94-97 Cobra wheels, Fix the sagging headliner, New black sunvisors, 99-04 rear seat to match the fronts, new A/C compressor, Install the V8 Cruise modulator so I can have working cruise, and some body work...

Wife's 90 notch -
5-lug conversion (2001 GT stuff from my 93). Keep the 4cyl,full exhaust finally, springs so it does not sit like a truck.

GroverDill · Nov 28, 2010

Get the Fox out of tuner hell.

11 GT to get Magnaflow catted X pipe, and hopefully Steeda sport springs with some new dampeners.

92GreenGT · Nov 28, 2010

Install the 4R70W that's laying in my garage and get rid of that POS TKO 600!!!!

Ozz · Nov 28, 2010

More chrome

Well, what is your winter project this year?

Kdubslugga

Active Member

skunk21

Active Member

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

1987LXragtop

Member

aar0s

ReefBlueHatch

Active Member

281pony

Active Member

NIKwoaC

中國製造

SMOKEDYA

Shaolin Crane

Banned

capri debris

Member

NIKwoaC

中國製造

aar0s

Shaolin Crane

Banned

srtthis

the guy doing it does every local racers rear end

Mustang5L5

That is…until I whipped out my Bissell

Chrome_Rust

Member

GroverDill

GoldMember

92GreenGT

PEAT

Ozz

I think I have a problem here.

Similar threads

Well, what is your winter project this year?

Active Member

Active Member

it sucks (I know) to be on the receiving end

Member

Active Member

Active Member

中國製造

Banned

Member

中國製造

Banned

the guy doing it does every local racers rear end

That is…until I whipped out my Bissell

Member

GoldMember

PEAT

I think I have a problem here.

Similar threads

Privacy & Transparency

Privacy & Transparency