What cam do I have?

Brando 91LX

New Member
Sep 30, 2006
36
0
0
Guy I got the motor from told me that there was an aftermarket cam in it but didn't know what it was. Stampings on the end are 1C27 , EA, and J. Might be stock for all I know. I was gonna order the TFS 1 but it depends what I find out it is...Thanx in advance
 
you could likely tell if its stocks by measuring the base circle of a lobe then measuring the top of the lobe. that would give your lift at the cam. if the valve lift on a stock cam is .444 then the cam lift should calculate between .277 and .278. hope this helps. better yet, stick it in the block and measure how much it moves the lifter.