what the advantage of welding axle tubes?

Bosko5.0

Active Member
May 18, 2006
1,067
0
37
longwood, FL
and where can i get them welded? and is there a special way to weld them?and how do i make sure their straight? and last but not least how much should i expect to pay to weld them? and does anybody know where i can purchase a nice welder for not so much money maybe $300 so i dont have to ask so many Question?????????????
 
people weld them to keep the actual tube from shifting in the housing. from what i know, the axle tubes are actually pressed into the rear so guys usually run a bead of weld where they are pressed in. its clearly noticeable where they meet. i've always thought about doing this but its really for cars running mega hp.
 
94-302-vert said:
There is also a LOT of risk if done wrong. If the rear end is not in a jig to hold it perfect you end up with a rear end that is toast.
A jig would help to keep things aligned, but but a good welder will make the difference, by not inducing thermal stresses that can cause some warping.
 
I agree, no jig... no weld. Most places that do this have a large solid rod of metal that fits snuggly into the rear end from tip to tip that keeps everything nice and straight when welding the tubes. I don't have mine welded but I wish I did. There are aftermarket axle tube brackets available too that bolt to holes that the dog bone weight used to use and they then connect near the shock mounting location forming a triangle so to speak. This will prevent the wheel and axle tube from moving foward and bending/twisting. I know GMKILLR runs these on his car. I've thought about buying and/or making a set for a while now.