- Aug 17, 2005
- 65
- 0
- 0
Guys, im stuck with this ?. I looked around for the answer, but i really couldnt find the answer to my ?. For my birthday im getting a 2400-2600 TQ converter and 4.10 Rearend. I'm also getting a C&L kit( heat sheild, maf, and pipe) and a set of underdrive pulleys. Over the winter im going to purchase the Twisted wedge H/C/I combo, but im also getting 500 bucks for my bday so i have money for a Tb and Headers( My headers i have now have 2 bolts missing and one almost out, i want knew ones). So here is my ?'s. I want to get a 70mm Tb cuz i would think bigger is better since im gonna get the H/C/I, but i wanted to know if i was going to lose Hp now cuz im takin the car to the track before i store my car. I also was thinking y would i get a 65mm, dont we have them in our cars already.. I also would like to know what headers are the best ones( No long tubes, i have to pass emissions) and which X-pipe with cats is good. I was thinking a pair of Mac Equal length with a Bassani or Magna flow X. I already have an Amercain Thunder Cat-back and Fipk Kit. Thanx alot Guy's. The car is a 1994 gt auto conv.
Ps. i ran 15.7 at the track with the headers,cat-back, and fipk. I wanted to know where would i be at after gears, TQ converter, C&L kit, Pulleys, all bolted headers,Throttle body, and a X-pipe. I'm hoping for mid 14's, but i doubt ill get there wit my luck. And the 15.7 i got wasnt from a bad launch, my car doesnt even spin the tires, all i did was brake trq at 1700 rpm and then take off. Sorry for the really long post guys. thanx again
Ps. i ran 15.7 at the track with the headers,cat-back, and fipk. I wanted to know where would i be at after gears, TQ converter, C&L kit, Pulleys, all bolted headers,Throttle body, and a X-pipe. I'm hoping for mid 14's, but i doubt ill get there wit my luck. And the 15.7 i got wasnt from a bad launch, my car doesnt even spin the tires, all i did was brake trq at 1700 rpm and then take off. Sorry for the really long post guys. thanx again