Which rockers with AFR 165's?

[LXSTASY]

I was at Maple Grove this weekend and I was looking at Harland Sharpe rockers and they told me that the AFR head was not a true inline head and that I needed rockers that were $290 instead of $225. He said that the positioning is off and I need the more victor jr, ones. Is this true or can i use the inline head version of Harland Sharp or the blue FMS ones?
Any other rocker suggestions are appreciated.

Thanks
Dan

 

[Grn92LX]

My friend ran scorpions with his afr 165's. Worked just fine. I run ford racing 1.6's, work just fine too

 

[meangreen92lx]

They are inline style. I run $195.00 scorpions on mine which FTI recommended. Any brand will work but I've heard of problems with the comp cams pro magnums and AFR heads. I believe it is a stud issue. The best move would be to upgrade to 7/16 studs while your there.

 

[5spd GT]

Yep I had Ed upgrade my studs from 3/8's to 7/16's for $30 bucks more.

He suggested to use the Scorpion 1.6's he sells for my car. They look to nice of a piece to be underneath valve covers They are a real nice quality and have worked flawlessly since I have had them...

 

[maverick0716]

I have Comp Cams Pro Magnum rockers for my Edelbrock heads. Chromeoly steel that are lighter at the valve than any aluminum rocker.....a lot stronger too.

 

[LXSTASY]

Getting back to the inline head theory of AFR's i was told my the Harland Sharpe guy that although they said to use an inline head rocker, he said that the Victor Jr. rocker lined up better. any thoughts?

 

[mustang120plus]

I personally have AFR 165's and I run scorpion 1.6's. I like them lots!