WHICH X PIPE ASAP?!?!

[DerekStangGT]

i was gonna order the o/r x pipe from mustangtuning.com, but the price jumped from $130 to $150. so now i can buy either the UPR X pipe or the Mustang Tuning X pipe made by pypes. which would you recommend for a little power, but mostly sound?? i want to order this pipe no later than 2 hours from now!! thanks

 

[GoneMad96]

go with either bbk or dr. gas is dope, they both good dont go with upr i havent heard anything bad about them but bbk or dr. gas would be a better pick bro.....

 

[DerekStangGT]

go with either bbk or dr. gas is dope, they both good dont go with upr i havent heard anything bad about them but bbk or dr. gas would be a better pick bro.....

thanks for the tip, and for the quick reply, but i can only spend up to $150 for the X pipe on my budget. plus i have to buy the MILs, and a floorjack, jackstands, and rhino ramps. cant afford more than UPR or Pypes x pipe

 

[DerekStangGT]

bumpity bump

 

[Blev]

One word....

eBay

 

[DerekStangGT]

One word....

eBay

just looked, nuttin. all x pipes are priced from about $200 and up. also, where can i buy the cheapest MILs??

 

[GoneMad96]

yeah man if you have to buy all that then you kinda screwed lol lol.... upr is good! have fun

 

[Frank 03GT]

Dr Gas all the way! I thought it sounded good before, but I just installed my Flowmaster cat-back and OMG! I didn't think a stock 4.6 could sound like this...

 

[mity2]

i bought my BBK off of E-bay for 120 bucks from brothersperformance

 

[DerekStangGT]

i bought my BBK off of E-bay for 120 bucks from brothersperformance

ive heard bad things about BBK x pipes. ive heard they have some problems with lining up straight, and also that they hang too low and scrap over speed bumps. so im between ONLY the UPR X and the Pypes X (from mustangtuning.com)

 

[jas142]

BBK is a bitch to get on, and supposedly doesn't flow too well.

I have a UPR o/r pipe. Fits very well, has a nice sound, and I feel some more power up top now (although I might have lost a little down low). Plus, you can't beat that price!!

 

[DerekStangGT]

BBK is a bitch to get on, and supposedly doesn't flow too well.

I have a UPR o/r pipe. Fits very well, has a nice sound, and I feel some more power up top now (although I might have lost a little down low). Plus, you can't beat that price!!

yeah it is a good price. i think i am gonna get the UPR because more people on stangnet have it than the Pypes X pipe

 

[03-s281]

UPR, price, fit, and sound you cant beat it!

 

[WOT]

Bassani, Ebay, $169.

Not bad for a stainless x-pipe.

 

[Firemanz]

Where are you at in TX? I know of someone local here in S.A. trying to get rid of a BBK O/R X.....

Lawrence

 

[955.0HO]

i got my Upr x-pipe from www.coolblueperformance.com for 155 to my door.

 

[pypesexhaust]

The Pypes X pipe is the same as the UPR X with added reinforcement plates at the welded junction for extra support, Air tube and secondary 02 sensor rings (96 and up)so that cats could be added later on and sensors reconnected.

 

[CottonBurnerz]

save up some more and get magnaflow.... although Dr. gas is pretty popular.. but it comes in 3 pieces and you have to get them weld together I believe..

 

[Bullitt_#1346]

Another vote for Magnaflow. I have their catted x pipe and love the sound and extra torque I picked up.

 

[StngStr]

Don't get the BBK. It DOES hang low, and it doesn't sound as good as others. Too raspy. Mine fit well though, no problems with that. I paid $80 for it used though.