• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Wooo Woooo. I blew up my transmission.

  • Thread starter Thread starter Numbles
  • Start date Start date May 7, 2004
  • 1
  • 2
Next
1 of 2 Next Last

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
May 7, 2004
#1
  • May 7, 2004
  • #1
What a night.

After fillin up at $1.99 a gallon at the good old Phillips 66 by my moms house in the burbs. I decided to burn off some cheap gas by doin a little powershiftin. Well, I turn right and get on it through 1st. Blow the tires off in 2nd. And when time came to throw it in third, BOOOOOOOMMMMMMMM B*itch there goes my trans.

Every gear except 3rd works. I dont know why its funny. But now I actually have a reason to go shopping for a good deal. Usually its, partshopper, the x2c's website. But I got my eye on that new trans the x2c has. I know they have 2. They have 2 different TQ ratings. Anyone have any expierence with both.

Long lived the stock T-5
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
May 7, 2004
#2
  • May 7, 2004
  • #2
Very nice . The T-5 Will take some abuse but they dont like power shifting . Have you thought about rebuilding it and turning it into a G-Frorce Transmission??
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
May 7, 2004
#3
  • May 7, 2004
  • #3
Alright. The x2c one is out. I remember them being about $500 cheaper. Whats the g-force. Ive never heard of it.

BTW, It was gonna go sooner of later. I got a couple of video's of me barkin all 4 gears at the track. I just gotta get my friend to put them onto the computer.
 

GTPhreak

Founding Member
Mar 16, 2000
5,505
0
77
Rowlett, TEXAS
May 7, 2004
#4
  • May 7, 2004
  • #4
i see complete 3550 local usually for around 750...might look for one local to you
 

onebad95

Sherriff of Bling King County
Jul 22, 2002
1,237
0
37
At the end of the track waiting for you !!
May 7, 2004
#5
  • May 7, 2004
  • #5
go g force...
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
May 7, 2004
#6
  • May 7, 2004
  • #6
Numbles said:
Whats the g-force. Ive never heard of it.

.
Click to expand...



Its a beefed up T5, it gets all new internals that makes it stronger then a Tremec, Lighter then a Tremec, you can still use the same shifter w/ it. Its about $1,500 for a rebuild.
 
M

mustangman33

Member
Mar 13, 2004
262
0
16
Chicago, IL
May 8, 2004
#7
  • May 8, 2004
  • #7
Going through the same issue, I came to the conclusion that the gforce is the way to go, more than likely you broke your main shaft, and if you are pulling alot of hp, gforce stated that the upgrade can handle up to 600hp, but dont know how it will hanle those power shifts though.
 

stang_gt_1994

Founding Member
Mar 21, 2002
2,723
0
0
Powder Springs, GA (30 min. from Atlanta)
May 8, 2004
#8
  • May 8, 2004
  • #8
The case is the weak part of doing a g force swap. I wouldent waste money on another t-5
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
May 8, 2004
#9
  • May 8, 2004
  • #9
Do your homework before buying a G-force. Just start searching and reading what is being said by G force owners about that trnasmission... its not all good.
 

stang_gt_1994

Founding Member
Mar 21, 2002
2,723
0
0
Powder Springs, GA (30 min. from Atlanta)
May 8, 2004
#10
  • May 8, 2004
  • #10
To me its like putting billet internals in a stock block.
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
May 8, 2004
#11
  • May 8, 2004
  • #11
stang_gt_1994 said:
To me its like putting billet internals in a stock block.
Click to expand...


Ditto!

HOWEVER... they just came out with a new HD case... so that may help.
 

TT91

Active Member
May 23, 2003
1,536
0
36
Paramus, NJ
May 8, 2004
#12
  • May 8, 2004
  • #12
Go with X2C...u wont regret it..Heres a great thread with alot of Info and pics from X2C representatives..
http://www.turbomustangs.com/forums/showthread.php?s=&threadid=16897
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
May 8, 2004
#13
  • May 8, 2004
  • #13
Breaking things like transmissions are always a good thing . How many miles were on the car? I probably have a good 100 1-2 powershifts, and about 50 2-3 powershifts. I wonder how much longer mine is going to hold up for; you've got me nervous! I'll just make myself think that you didn't do it fast enough .

Joe
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
May 9, 2004
#14
  • May 9, 2004
  • #14
I bought the car with 95k and it has just under 110k now. I didn't have the balls to powershift untill about 106k. So take that for what you will. I also have a stock shifter and a new clutch. So it takes me longer to shift then on top of that the new clutch grabs really well.

Im still looking into the x2c trans. I comes with a shifter too so thats a plus. If I go the x2c route, Im going to borrow the money for a 331 shortblock to install at the same time.
 
S

slytherin

New Member
Apr 5, 2004
702
1
0
northeast ohio
May 10, 2004
#15
  • May 10, 2004
  • #15
I have posted on this topic b4 but i'll say it again G-force's customer service sucks. I placed an order and waited and waited finally said skrew it and cancelled my order.
 

red94fiveo

New Member
Apr 12, 2003
1,269
0
0
Wichita, KS
May 10, 2004
#16
  • May 10, 2004
  • #16
Like Paul and slytherin said, do your homework before ordering a g force. Their product has the potential to be a great one, but I have heard some horror stories about customer support and bad parts once in a while.
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
May 14, 2004
#17
  • May 14, 2004
  • #17
Sorry to revive an old thread of mine but I had a question to the g-force customers. There is an article in the new MM and FF all about the g-force transmissions.

Im thinking about getting their straight cut gears and dog ring syncros trans. Would that be too much of a race trans. They also have your choice of 2 different gear ratios and a .58 5th gear. With a 3.73, would that drop the rpm's too low. I do do quite a bit of highway driving. I dont know what the rpm's would be at like 80 wiht that 5th ratio. This customer service is an issue steering me away from them but are their transmissions worth the extra cash.

The x2c and the g-force will probably turn out to be the same amout of money. Im the type that when Im going to do something I go all out. So Im not going to put a stock t5 back in. Ive been driving without 3rd for the week and its not too bad.

Anyone have any opinions on the g-force straight cut gears and dog ring syncros?
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
May 14, 2004
#18
  • May 14, 2004
  • #18
Don't use straight cut gears on the road. They are noisy and very hard to shift. Stick with the helical cut gears.

If you do a lot of highway driving, you will benefit from the .58 O/D gear. It will not bring the RPMs too low. With your current O/D gear, you probably can use 5th around 45-50 MPH, and should be turning about 1650 RPM. With the .58 O/D gear, you can cruise at 80 MPH and turn probably 2200 RPM. You won't be able to use it at "lower" speeds, but it will be beneficial at the "higher" highway speeds.

Joe
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
May 14, 2004
#19
  • May 14, 2004
  • #19
D&D performance, the one with all the tranny kits. Sells the t-56 speeds for about the smae as the x2c and g-force trans's. Now since I dont really want a hard to drive trans, Id be getting the helicut gears instead. Thanks for the info joe. The g-force would be cheaper. But is it worth the small amount of extra money to get a 6-speed. If I can talk them down Ill go with the viper spec.

Its all in the air right now. My car drives fine with only 4 gears. Although 3rd grinds at random when not even in geart. its just like a normal trans. Id like to get something that will handle abuse. Because powershifting is so much fun. And ive got into the habbit of doing it and not even realizing it.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
May 14, 2004
#20
  • May 14, 2004
  • #20
what do you mean by this

My car drives fine with only 4 gears. Although 3rd grinds at random when not even in geart. its just like a normal trans. Id like to get something that will handle abuse.


because if you are driving it with all those pieces of third gear, and most likely pieces of that countershaft in the tranny you are gonna run into more problems, like if one of those chunks etc. gets in the wrong spot, no more tranny

jason
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

N
Drivetrain Think I blew my trans first time running at the strip
  • Nismoboyo
  • Jul 15, 2024
  • SN95 4.6L Mustang Tech
Replies
4
Views
630
SN95 4.6L Mustang Tech Jul 16, 2024
85GTStangGuy
Car popping car starts up but wants to die if I don’t hold pedal down
  • Creomod
  • Mar 25, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
30
Views
3K
Fox 5.0 Mustang Tech Jun 16, 2025
AeroCoupe
What in gods green earth happend to my N/A 2.3?
  • Piranahbite
  • Mar 24, 2024
  • 2.3L (N/A & Turbo) Tech
Replies
8
Views
2K
2.3L (N/A & Turbo) Tech Jun 1, 2024
Piranahbite
So confirming what I need to do to put a '88 CV 302/AOD in my '65 A-code.
  • 1320stang
  • Apr 19, 2023
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
7
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2023
1320stang
I am my brothers keeper
  • Cammer429
  • Oct 10, 2020
  • The Welcome Wagon
Replies
1
Views
936
The Welcome Wagon Oct 10, 2020
7991LXnSHO
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?