Wow... will 315/35/17's fit on my vert???!

Adam95GT · Oct 23, 2006

Ok well i dropped my mustang with sportlines i got about a 1 finger gap in the rear... will i be able to fit 315/35/17s under the back with out my fenders cutting the **** out of them... i think they will stick out a bit.... and im not sure my car can handle it... i got a good deal on a set of cobra r's that i dont wanna pass up.... but i got less then a 2 finger gap.... how much room willl that 10 less aspect ratio give me...

the rear looks like this maybe a tad lower since it settled....

The Green GT · Oct 23, 2006

Get them. My car is maybe a litlte lower than yours and Ive never had any rubbing problems.
Mine dont stick out at all. But they are flush with the inside part of the panel

Adam95GT · Oct 23, 2006

thanks they fit in the well then??? my car might be lower cause its a vert

i dont know y i always double post... hmmm

The Green GT · Oct 23, 2006

The will fit. Verts are heavier, but the springs made for verts accomodate for it.

I cant fit my knucles between my tire and fender.

Adam95GT · Oct 23, 2006

my sportlines were not made for verts they are coupe springs...

The Green GT · Oct 23, 2006

Adam95GT said:
my sportlines were not made for verts they are coupe springs...

How much did it lower your car?
Im pretty sure the extra 200 or so pounds being a vert will drop it THAT much more.

But Im positive you will be safe with the 315's. I am VERY low and I have no trouble at all.

Adam95GT · Oct 23, 2006

as long as they fit in the fender thats all that i want! im picking these up... $420 good for a set of Chrome cobra R's 17x9 and 17x10.5's with tires less then 3k on the tires....

Quick photoshop... What you think???

stprorolla49 · Oct 23, 2006

mines got 315 nitto drags on sportlines, and i dont have any problems...i did beat in the inner fender slightly, but only because it was rubbing ever so slightly when i would take a turn fast...otherwise, the agressiveness of this tire/spring combo is awesome!

heres a pic:

Adam95GT · Oct 23, 2006

is it noticable from looking at the car that the inner fender is beat...??? im not woried about the plastic... im woried about cutting up the tires and bending the 1/4 pannel/ top of wheel well

The Green GT · Oct 23, 2006

Adam95GT said:
as long as they fit in the fender thats all that i want! im picking these up... $420 good for a set of Chrome cobra R's 17x9 and 17x10.5's with tires less then 3k on the tires....

Quick photoshop... What you think???

Looks good.

But the back will be deep dish right?

Like mine

You should see about getting them stripped and powdercoated black. That would look badass on a red car.

Adam95GT · Oct 23, 2006

wow didnt notice the backs were DD's i think they are

The Green GT · Oct 23, 2006

Adam95GT said:
wow didnt notice the backs were DD's i think they are

They should be. My Cobra R's are. And I dont thik they can work the '95's like the '03's. The '03' dont have the lip, but they are still deep dish.

Adam95GT · Oct 23, 2006

what do you mean work with the 95's they wont fit???

http://cgi.ebay.com/ebaymotors/ws/e...&viewitem=&item=280040849376#ebayphotohosting

All info i got

The Green GT · Oct 23, 2006

Adam95GT said:
waht do you mean work with the 95's they wont fit???

No I mean they dont make 10.5 in '95 Cobra R's with out the lip, but they can make the w/o the lip on '03 Cobra's

Trust me, they will fit fine and look awesome

The dish PWNS all

Thats before I lowered it

Adam95GT · Oct 23, 2006

thanks... wow its amazing what i have been able to pick up in the last month for this car... should be in the 13's realllly soon

i dont think they are that deep though take a look at pics

Adam95GT · Oct 24, 2006

as much as i wish they were lipped i dont think they are

1slow95 · Oct 24, 2006

It depends what tires you run. Nitto DR's are small for 315's, so they should fit pretty good. I have Goodyear F1 GS-D3's and they rub a lot. I wanted the fenders rolled, but the guy that painted my car just took a grinder to them instead. I got rear ended a month ago and pushed off the road and this is what happened

Killercanary · Oct 24, 2006

The Green GT said:
No I mean they dont make 10.5 in '95 Cobra R's with out the lip, but they can make the w/o the lip on '03 Cobra's

That is NOT true! They do in fact make 10.5's without the deep dish. The '95 cobra R without the lip was the FIRST 10.5" wheel readily available for our cars. AFS had made them for years. The "lipped" cobra R's are the new kid on the block so to speak when it comes to 10.5" wheels.

I run 17X10.5" wheels with 315's on my 'vert, but it is not lowered. Do a search for slow50 or Ernan as his 'vert is the same color as yours with the wheels you are planning to get. I think he has 315's too.

Killercanary · Oct 24, 2006

Adam95GT said:
thanks... wow its amazing what i have been able to pick up in the last month for this car... should be in the 13's realllly soon

What mods do you have and think that will put you into the 13's? I've done it so I know what it takes and can help you if you'd like. I haven't been on much lately and therefore am not familiar with your plans.

Adam95GT · Oct 24, 2006

Low-5.0 said:
It depends what tires you run. Nitto DR's are small for 315's, so they should fit pretty good. I have Goodyear F1 GS-D3's and they rub a lot. I wanted the fenders rolled, but the guy that painted my car just took a grinder to them instead. I got rear ended a month ago and pushed off the road and this is what happened
QUOTE]

Yea this is what i dont want hapening.... click the ebay link for the tires

Wow... will 315/35/17's fit on my vert???!

New Member

Attachments

No 13 year olds are safe around me.

New Member

Attachments

No 13 year olds are safe around me.

New Member

No 13 year olds are safe around me.

New Member

Attachments

Active Member

Attachments

New Member

No 13 year olds are safe around me.

Attachments

New Member

No 13 year olds are safe around me.

New Member

No 13 year olds are safe around me.

Attachments

New Member

New Member

Attachments

The car that set the bar.

The car that set the bar.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency