Progress Thread Project: Buried Under A Mountain Of Snow Black Hole Money Pit.

[srtthis]

and had i not got the highports i would still be running the GT40 combo trying to go 10's with it

 

[srtthis]

More stuff sitting around

 

[srtthis]

well the rust spot is gone... i cleaned up as much of the rust in the frame rail as i could and got the patch panel made. hopefully have enough time this week to start welding it in place

 

[srtthis]

patch panel in place.. little bit of trimming needed and some holes to drill so i can spot weld it back to the frame rail but that shouldnt be an issue.

 

[Noobz347]

preeeetty

 

[srtthis]

finally sat down and started to run some of the wires for this
still have more parts coming for it. guess now is the time for me to make up my mind on running a progressive or not

 

[srtthis]

no turning back now

 

[srtthis]

These should work nicely

 

[srtthis]

for anyone wondering they are comp endure-X solid roller lifters

 

[TOOLOW91]

for anyone wondering they are comp endure-X solid roller lifters

Solid roller ? Race car !!!!


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

 

[84Ttop]

You done yet? It's racing season in like a week

 

[srtthis]

uhhh maybe next season... hell the race car motor isnt even done yet!

 

[srtthis]

Solid roller ? Race car !!!!


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

i can not confirm nor deny the race car status of this car

 

[TOOLOW91]

i can not confirm nor deny the race car status of this car

Not until you have your battery cut off through your tail light like two siblings that we know do . Lmao


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

 

[srtthis]

LMAO

i got a solid roller... mini tubs and coil overs and a 10pt... but damn it shes got me beat with a battery cut out. making hers more of a race car

 

[TOOLOW91]

LMAO

i got a solid roller... mini tubs and coil overs and a 10pt... but damn it shes got me beat with a battery cut out. making hers more of a race car

Scotty does too with his stock pro mod. LMAO

 

[Noobz347]

for anyone wondering they are comp endure-X solid roller lifters

Don't care. Wanna know how the whole motor goes and whether you have to re-adjust every hundred miles or what.

You might have seen me post before that I've always wanted to do a solid lifter, high compression, street motor with long runners.

What are you shooting for in C-HP?

Edit: Oh... I would also settle for flat-planed V8, harness, and computer, from a GT350. I'd put that in a Fox.

 

[srtthis]

i have no real goal HP wise... i think it will roughly make 1000 on the bottle.

biggest goal is just to go fast and have fun with it honestly

 

[TOOLOW91]

Don't care. Wanna know how the whole motor goes and whether you have to re-adjust every hundred miles or what.

You might have seen me post before that I've always wanted to do a solid lifter, high compression, street motor with long runners.

What are you shooting for in C-HP?

Edit: Oh... I would also settle for flat-planed V8, harness, and computer, from a GT350. I'd put that in a Fox.

Believe nick says he only has to adjust his like 2 times a year which i was shocked .


Sent from my iPhone using my fingers while my auto correct makes me seem illiterate

 

[srtthis]

we check them very few times we take the race car out. and unless somethings wrong they never move more that .01" or so