Search results

  1. 94Blue302GT

    Is There A Complete New Efi Solution?

    Ok guys, I haven't been on here in AGES, but here I am... Simply put, if I built a motor... say a 347 Dart with AFR 185's and some fancy intake (Looking for 6500-7000 peak hp) is there any way to do aftermarket EFI with a MAF on this thing? I know they sell the harness aftermarket at a few...
  2. 94Blue302GT

    What to do with inner fender?

    Ok, i've gotten dimensions previously from this website, and all the corners seem to be lined up pretty well in the engine bay, BUT, the guy did a bit of a hacked up job. I'll show you the pictures. What do you recommend? Looks like he bought a front inner fender patch panel. I was...
  3. 94Blue302GT

    distributor shaft sizing

    I need a distributor, so I started looking things up on them. I have a '66 with a 289, BUT, i'll be swapping a 331 roller from my '94. I've seen 3 different size distributor shafts, .467, .500, and .531 What works with what motor, and when did they switch this over? It seems to be very...
  4. 94Blue302GT

    Will HEI style dizzy have clearance issues?

    I'm looking at some of the new HEI style dizzy for my late model 302 stuff into a '66. Will I have any clearance issues with an Edelbrock RPM and Edel Carb? Seemed these dizzy's are wider and taller than stock, and I don't wanna make a bad purchase Thanks Blu3
  5. 94Blue302GT

    Redo Deluxe Seats, or use my '94 seats

    I have the deluxe interior package in my '66. I don't know if that has anything to do with the seats or not, but they're fairly nice. The problem is that the previous owner had it in a barn and mice made a nest out of both front seats. The whole back of the seats is just torn to shreds and...
  6. 94Blue302GT

    '94 dizzy and a msd box with carberator?

    Correct me if i'm wrong, but im planning on doing a motor swap with my '94 into my 66, but putting the intake and 750 carb on it. Can I use the 94's dizzy and just get a MSD 6AL or similar to run it correctly, or is it more worth my while to get a vaccuum advance dizzy for it? The 94's is...
  7. 94Blue302GT

    Another how muchwill this make....for a 66 hatch though!

    I'm transplanting my 5.0 (from a 94) into my 66 hatch. I currently have a turbo setup, but it would take some pretty hefty modification to fit it into the 66, which i'd rather not do. So, gonna sell turbo stuff, BUT... I was thinking of getting my master plan together before I start it...
  8. 94Blue302GT

    $1200 stock intake?

    I've been looking at the possibility of parting out my motor and found on ebay an intake selling for $1200. How do I know if I have any "gems"? '66 coupe with stock 4bbl, but the motor isn't the original, so it doesn't match vin. intake says fomoco; haven't checked much else, he...
  9. 94Blue302GT

    cpp front suspension - shock tower patch panels

    A couple Q's here guys... First, I WAS going to do a Mustang II front sus. just because it's all one package and will ensure that things are straight and aligned correctly. COST however, is making it not doable for another year or two. I also have no need for the xtra room etc. that it...
  10. 94Blue302GT

    Engine bay dimensions for suspension alignment

    The car i purchased has had an accident on the driver's side front corner. The hood and fender's seem to line up fairly well, but I'd like to know if there are some dimensions you could all help me with. I have a 66 with a 289 4barrel. I'm looking mainly at the distance between shock towers...
  11. 94Blue302GT

    Original rebuild 66 Motor/4spd Trans Manual and ds and 8" axle

    Original motor! '66 289 4bbl rebuilt with some ford motorsports chrome valvecovers and an edelbrock 4 barrel carb. I didn't do the work, just bought the car and have a different motor to go in it. Feel free to ask any questions through email. Also, original 4 spd manual tranny/driveshaft...
  12. 94Blue302GT

    How much do I sell for? 66 original motor, trans etc.

    I have a 66 mustang with original motor, trans, drive shaft, and axle. I'm not a concourse type person, more of a hot rod/cruiser type of guy, so i was going to sell the motor etc. How much should I be selling that all for, and should i part them out separately? or as a package? I'm...
  13. 94Blue302GT

    94/95 parts for 66 coupe

    Hi guys! My username is what car I USED to have.... Now i have a 66 coupe sitting in the driveway.. currently on the trailer yet. Straight, no rust, but in need of some resto. I was going to start with a chassis overhaul. The 94 I have was in great condition, except for the frame, which...
  14. 94Blue302GT

    4.6 2v similar to 5.4 triton?

    Hi guys! I'm usualy in the 5.0 section with my turbostang, so I know a lot more about the windsor block than any of the mod stuff. Anyways, i just bought a 2000 F150 with a 5.4 triton and it looks a lot like the 4.6 you guys run. This "intake plenum" looks about the same, and i'm assuming...
  15. 94Blue302GT

    scrap it, swap it, or what?

    94 with stuff in sig. Totalled 2 years ago. I've been working on it between work, finishing up college, getting married building a house, etc. I'm having a hard time lining up the body, and getting the motor to run right. I may take the turbo off and go NA for awhile to see if that eliviates...
  16. 94Blue302GT

    Roll cage rule info needed

    I'm going to need a roll cage this next summer with the turbo up and running, SO I plan on welding it through to the subframes (ebay kind, but full length) and it's also a weekend cuizer, so getting in and out is a must. Also, i've seen it where you need to cut out the insides of the front...
  17. 94Blue302GT

    white smoke, not losing water

    could it be old gas? also, is the gauges temp sensor the same that the ECU recieves? It never moves.
  18. 94Blue302GT

    Anyone good at straightening a body?

    I wrecked my car awhile ago, but it's running now (needs tune) but the body isn't quite straight. I had to remake a lot of area's and ended up welding in a section off of another car. When i place the hood on straight according to the cowl, both fenders's are fine up against the glass, but up...
  19. 94Blue302GT

    temp sensor bad?

    Ok, i've been diagnosing this problem for awhile, and i might have actually put something up a while ago, but this is where i'm at: My car dies when it's warm, but when cold, idles beautifully. 255lb pump, bbk fpr, 39 lb injectors, 42lb forced maf, turbo. It hasn't left the garage yet...
  20. 94Blue302GT

    A gallon of water every other day and no leaks?

    I've been putting a gallon of water in my radiator every two days or so and it keeps going down. I originally filled it to the top, bounced it around and hand spun the water pump. I had to tear the thing down before to look for a water in the oil problem. NOW, it's all buttoned back up, but...
Top Bottom
Back
Forums
Menu