• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

1969 Power steering very loose

  • Thread starter Thread starter troyfire30
  • Start date Start date Mar 19, 2010
T

troyfire30

New Member
Mar 19, 2010
3
0
0
New Brunswick, Canada
Mar 19, 2010
#1
  • Mar 19, 2010
  • #1
Hey guys, my 69 coupe has a completely new front end with the exception of the power steering assist module...my problem is the car sways terrible and feels unsafe. I have taken it to a dealer and they said they think the play is coming from the module because when they wiggle the front tire side to side they see movement in the module but they couldnt say for sure, does this sound like the problem? Also, is there any way to make the car handle better? Any help would be greatly appreciated! thnks
 
2

2+2GT

10 Year Member
Apr 25, 2009
3,333
10
79
Southeastern Pennsylvania
Mar 19, 2010
#2
  • Mar 19, 2010
  • #2
If they are talking about the valve, make sure the engine is running! The valve is sloppy loose with the engine off.

You need to have someone familiar with early Mustangs check your gearbox and control valve. This PS was very sure and responsive when new.
 
C

chockostang

New Member
Jun 16, 2009
106
0
0
Mar 19, 2010
#3
  • Mar 19, 2010
  • #3
To a dealer?? When you walk in the door, ask for the person doing the evaluation on the Classic. When this person arrives, you need to make a very important analysis.

If very young, has many ASE patches attached to his shirt, Computer Electronics Man of the Year, RUN LIKE HELL out the Door.

If he is a Grumbly, to the point OLD Ford Nut, Listen intently, answer his questions, you have a excellent chance of getting your problems resolved.

Dan @

chockostang
 
T

troyfire30

New Member
Mar 19, 2010
3
0
0
New Brunswick, Canada
Mar 20, 2010
#4
  • Mar 20, 2010
  • #4
Thanks

Thanks for the quick response guys...the engine was off when he checked it so that will be the next step, and then its off to see a grumbly old ford guy!

Cheers, Troy
 
6

68RCodeConv

New Member
Oct 2, 2003
345
0
0
Houston, TX
Mar 23, 2010
#5
  • Mar 23, 2010
  • #5
Check the front end alignment. If you have little or no positive caster the car will wander all over the place. You want at least 2.5-3 degrees.
 
You must log in or register to reply here.

Similar threads

J
Help! 78 II has no power to any electrical except headlights and taillights and hazards.
  • JackH
  • Jan 8, 2024
  • 1974 - 1978 Mustang II Talk & Tech
  • 3 4 5
Replies
93
Views
12K
1974 - 1978 Mustang II Talk & Tech Mar 28, 2024
Noobz347
M
Fox Stuck Power Steering Rack
  • mcalvo
  • Jan 7, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
45
Views
8K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 25, 2023
mcalvo
M
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
496
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
D
Electrical Manual 2003 GT 4.6L coupe that will not start. Thoughts? Resources?
  • DapperFish
  • Jan 17, 2024
  • SN95 4.6L Mustang Tech
Replies
3
Views
1K
SN95 4.6L Mustang Tech Jan 22, 2024
PSKSAM2
P
9
1995 Mustang GT Crank no Start
  • 95gtV
  • Sep 1, 2023
  • 1994 - 1995 Specific Tech
Replies
6
Views
3K
1994 - 1995 Specific Tech Dec 4, 2023
SRago
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?