• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

2500 dollars to spend on a 93 Lx! What to buy?

  • Thread starter Thread starter Gotuhaha
  • Start date Start date Jun 3, 2005
  • 1
  • 2
Next
1 of 2 Next Last
G

Gotuhaha

New Member
Jun 3, 2005
6
0
0
Jun 3, 2005
#1
  • Jun 3, 2005
  • #1
Hi guys I R The n00bie. Im getting a 93 Mustang LX is only got 61k on it and its all orignal except flowmaster. I have set aside 2500 dollars for stuff cause i know im gonna get bit by the "bug." I wanna get stuff but not sure what to get, I know that i dont care about the pretty stuff i may get wheels later but i want the 2500 to be on performce. I dont to be a balls to the wall project car or anything just want to run with anything that pulls up beside me on the street that stock. Please let me know your sugestions and what you would do. PS 5 speed. Thanks in advance. gotu
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
www.mavrick.org
Jun 3, 2005
#2
  • Jun 3, 2005
  • #2
3.73 rear gears, short throw shifter, under drive pullies, exhaust!
 
G

Gotuhaha

New Member
Jun 3, 2005
6
0
0
Jun 3, 2005
#3
  • Jun 3, 2005
  • #3
Booo im hoping for better!
 

GTJAMMER

Founding Member
Sep 21, 2000
164
0
0
Kansas
Jun 3, 2005
#4
  • Jun 3, 2005
  • #4
Hey noobie, you asked for ideas, and he gave you one. Don't boooo... him for his advice, it's what you asked for. Second it was good advice. There's nothing wrong with building a good foundation that can handle what you put on later. Unless you want to blow your wad on a blower, and either sit and spin your tires all day which is cool, but gets you nowhere, or break a car that isn't setup right. Start with the basics.


GTJAMMER
 
N

nickg42oz

Founding Member
Dec 16, 2000
358
0
16
New Orleans, LA
Jun 3, 2005
#5
  • Jun 3, 2005
  • #5
Get a nice set of heads and some exhaust while you got the cash
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
55
windsor, Canada
members.cardomain.com
Jun 3, 2005
#6
  • Jun 3, 2005
  • #6
start small and go from there..the items stated above are the foundation that are needed to be able to make use of the power you want. Add up the $$ that gears and install, combined with a short throw shifter, throw in the exhaust, subframe connectors, pullies.. an you now at 1000$ or damn near. Now you have 1500...with that you can look at a set of GT40 heads and a decent intake..if there's anything left I'd then look at a cam and maybe some fuel upgrades. Any leftover cash should be put aside..cause if there's one thing I've learned..it's moded stangs take a little more TLC than I first thought.
 
J

jacks01cc

New Member
May 26, 2005
10
0
0
Jun 3, 2005
#7
  • Jun 3, 2005
  • #7
three letters N O S in just an afternoon you can get 100hp. i ran 2.2 seconds faster in th 1/4 with a 100 shot. i ran a wet kit and kept checking the plugs. the motor still runs great. i don't know about the $2000 left over!!!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,359
209
114
Ohio
Jun 4, 2005
#8
  • Jun 4, 2005
  • #8
Get some real brakes!
 

Daniel50

New Member
Mar 30, 2005
716
1
0
41
Discovery Bay, CA
Jun 4, 2005
#9
  • Jun 4, 2005
  • #9
Gears and Rear end rebuild-400
Full Sub Frame Connectors-100
King Cobra Clutch Kit-200
Underdrive Pulleys-100
Headers, X Pipe, Catback-800
K&N Filter Air silence removed-60
Mass Air and throttle body-250
Fuel Pressure Regulator and Pump-150
Slicks-300
Full tune up and coolant flush-100

that will put you at 2500 dollars. and low 13's or high 12's. add h/c/i and go 11's or supercharger, or nitrous. all will put you in 11's if you can drive
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
43
Lancaster, PA
www.cardomain.com
Jun 4, 2005
#10
  • Jun 4, 2005
  • #10
Daniel50 said:
Gears and Rear end rebuild-400
Full Sub Frame Connectors-100
King Cobra Clutch Kit-200
Underdrive Pulleys-100
Headers, X Pipe, Catback-800
K&N Filter Air silence removed-60
Mass Air and throttle body-250
Fuel Pressure Regulator and Pump-150
Slicks-300
Full tune up and coolant flush-100

that will put you at 2500 dollars. and low 13's or high 12's. add h/c/i and go 11's or supercharger, or nitrous. all will put you in 11's if you can drive
Click to expand...

Good suggestions, U can get pullies for under $100 so keep an eye out for deals, I had MACs and they are good, about 70 bux, also try to find used parts. Id also either go for a cobra intake or skip the mass air meter/throttle body and get a used nitrous kit. Also keep an eye out for used parts, that will save you alot.
 

5.0 Nostalgia

10 Year Member
Feb 28, 2003
904
5
39
CT
Jun 4, 2005
#11
  • Jun 4, 2005
  • #11
Don't chop that car up. It sounds nice. If you want to get more than what Maverick suggested for $2,500, turn your own wrenches. Personally, I would save my money for a while until you develop a plan for what you want to do with the car. Even though you might think you know, you should wait until you get the car and see how you like it. Don't forget, there are stock cars running 12's out there, so don't get expect to beat anything on the street for $2,500.
 

dstanggt50

Founding Member
Sep 13, 2000
1,316
0
0
Woodinville, WA
Jun 4, 2005
#12
  • Jun 4, 2005
  • #12
I would get a vortech, yeah you don't have supporting mods, and your car is stock, but the kit comes with everything you need to run on a stock motor. Keep the boost down, try to get a good tune, and it will be a great for future mods. Thats just my opinion though. I'm saving for a vortech now, if I could do it again, would have done the blower route first.
 
C

crunchie12268

New Member
Aug 4, 2004
599
0
0
40
Manhattan, KS
Jun 4, 2005
#13
  • Jun 4, 2005
  • #13
I would defiently be patient and shop around for the best deals. Because if you have the luck I do, you will find the best deals the day after you buy the part.

and I have a trickflow street intake for sale if you want it
 

Black 93 Fox

Active Member
Jun 1, 2003
1,995
0
49
Vancouver,Washington
www.cardomain.com
Jun 4, 2005
#14
  • Jun 4, 2005
  • #14
I would get the Trick Flow Track Heat package from summit. For $2,099 its a steal. Comes with heads, cam, timing chain, roller rockers, push rods, valve covers, intake, gaskets. with the rest of the money you can upgrade the fuel system.
 
P

PonyBoy90

Founding Member
Aug 30, 2002
555
0
0
53
Toronto
Jun 6, 2005
#15
  • Jun 6, 2005
  • #15
I'd hold off on the expensive mods for just a little while and just drive the car for a few months and iron out any bugs before investing money into the car. It doesn't help much that you spend $1000 on a whole new exhaust system and come to find you should have replaced the cooling system first as now the rads sprung a leak and is all plugged up. For myself, I drove mine for 6 months before spending on a new paint job.
 
C

crunchie12268

New Member
Aug 4, 2004
599
0
0
40
Manhattan, KS
Jun 6, 2005
#16
  • Jun 6, 2005
  • #16
PonyBoy90 said:
I'd hold off on the expensive mods for just a little while and just drive the car for a few months and iron out any bugs before investing money into the car. It doesn't help much that you spend $1000 on a whole new exhaust system and come to find you should have replaced the cooling system first as now the rads sprung a leak and is all plugged up. For myself, I drove mine for 6 months before spending on a new paint job.
Click to expand...


Thats a good suggestion. I always do a tune up (including 02's) and change all the fluids so I know when the service has been done. Then, I always seem to have cooling issues, so I flush the radiator and replace all the hoses. Then just drive it around and see if anything is noticeable.... like tires, brakes, suspension etc.
 

NakedRaygun

New Member
May 8, 2005
93
0
0
40
Chicago, Illinois
Jun 6, 2005
#17
  • Jun 6, 2005
  • #17
Supercharge it..if you can weld/know a nice welder turbocharge it.

DO RESEARCH.
 

Car RamRod

Banned
Mar 30, 2005
623
0
0
38
Queens, NYC
Jun 6, 2005
#18
  • Jun 6, 2005
  • #18
pay your insurance, and if youve got cash left, pay for some of mine.
 
8

89white50

Member
Nov 16, 2004
440
1
18
43
central MA
Jun 6, 2005
#19
  • Jun 6, 2005
  • #19
I would defiently be patient and shop around for the best deals. Because if you have the luck I do, you will find the best deals the day after you buy the part.
Click to expand...

Here's what i would do: gears, trak Loc rebuild, subframes & torque boxes, shifter, H/Xpipe, headers, alt, electric fan, manual rack steering.(little above 1500).

The grand left over...go buy a sportsman block and have it machined .30 over. Then start saving for a 331 or 347 stroker/heads/cam/intake(rest of the bs). Takes a lot longer. Your car(61k) sounds strong as it is now, why mess with it.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jun 7, 2005
#20
  • Jun 7, 2005
  • #20
Torque box, Sub frame, Intake, Gears, Shifter and tune-up/system flush(check breaking system). You should have some money left over for a throttlebody and maybe some Pullies.
Kevin
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
726
Fox 5.0 Mustang Tech Apr 13, 2026
Foxbodyjake
F
  • Locked
93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • The Welcome Wagon
Replies
15
Views
583
The Welcome Wagon Oct 28, 2025
Noobz347
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
687
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
S
I don know what im doing!
  • Sha_lala_pookie
  • May 5, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
11
Views
563
1965 - 1973 Classic Mustangs -General/Talk- May 11, 2025
Sha_lala_pookie
S
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
774
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?