2Blue2's 1977 Cobra2 Driveway Build

My son fixed her up ( so I can drive er, heh heh heh:rolleyes:)
There was collateral damage, the belt whipped the washer reservoir:eek::( when it broke.
So its broke now too.
KrWU+hLZQ3iOQcwqOykMng.jpg

combined with some white zip ties to use as filler material will fix that if you can't locate a replacement.
Delboy's Garage on Youtube has some great videos on the techniques you can use.

View: https://www.youtube.com/watch?v=gRCMIDILfEI&list=PLRNmU_dBl-GFpldNAVJOSy2JIoYcMYRmt
 
  • Like
Reactions: 1 users
  • Sponsors (?)


Always wanted to try an learn that.
But bid on one on fleybay for 19$ but bidding took it over 55$ plus more for shipping shipping
so maybe plastic welding. the tank has spider web cracking from age though.
 
Always wanted to try an learn that.
But bid on one on fleybay for 19$ but bidding took it over 55$ plus more for shipping shipping
so maybe plastic welding. the tank has spider web cracking from age though.
Depending on the severity, you might be able to plastic weld that too. I got good at it when I worked for Carmax.
 
  • Like
Reactions: 1 user
found a second washer tank to bid on!
well have to see if it goes for over 60$

its 20$ right now with a week to go.

There ,is a NOS in the box one on flea bay, but 200$
 
I read a really old post in some thread here that talked about using Never Dull to clean on the mutt2 steering wheel.
First pic, can you tell which two spokes are cleaner. Yeah not to great, but better and the pits show a little less.

IACMoFn4RfC5Ctlm9zFNaQ.jpg
Ty72JUx1TwyZs4Qqi0LnyA.jpg
 
  • Like
Reactions: 2 users
I couldn't get the flux wire feed welder to weld on this thin tin
Just burned up.
So I brassed new bolting tabs on
Then the only high temp paint i got is blue (i know they is supposed to be black but this car got alot of black on it"

Ks2kD15HQiy8rHvM0sxpgg.jpg
+Trr4joGRgiBQFal6wrOKA.jpg




Found some more of original heat shield still bolted to manifold and a wave washer.
%FsCL85%TFW456y8uVh1ww.jpg
Urvw5BJCS4u6gysN%i8UsA.jpg


Then found a burned SP boot. Went and dug around garage till i found a replacement and back in businesses .
Heat shield installed and its close to battery.
9+EHvoszTgKZWEfchuDLQQ.jpg
 
  • Like
Reactions: 4 users
more boring matenace type stuff

Power steering belt broke and killed the washer tank.

I looked online for a washer tank and bid one to 30$ before giving up.
It sold for 55 plus shipping

But FleaBuy tracks your actions and proffered another chance.

bid to 16$ plus 14$ shipping. On my doorstep for pennies less than 30$
Good enough.

KrWU+hLZQ3iOQcwqOykMng.jpg
Oblc49woSRecHeaqAX70hA.jpg
nUxiwzIkSO2uQ+ely9b52Q.jpg
 
  • Like
Reactions: 1 users
The son and I spent a few quality minutes (better than nothing) together.

i5UxQtjIRNS4hOkYK8jz2w.jpg
XobCqsAXQW+J3dWGZBfc2w.jpg
w37UZsDaRdm6ZOer0h+viA.jpg


Washer works reliably again,
score one point!
+9ZEuMkGTH6mS2ph+RTiGQ.jpg
icrjSxrWReGdTII4DecM%w.jpg

now about that puke take looking like barf.......
 
  • Like
Reactions: 3 users
There comes a time to do what ya got to do.
So we masked it up.
With the moon in the sky, the son painted the deck lid stripe.
Yes in the driveway.

r1CTbBOXSRue5bz85+PpCg.jpg
96JVeTevSwucudSxZblwUw.jpg


gF7DqqDCQa+L5Dm6XKYQmw.jpg
 
  • Like
Reactions: 1 users
Doing the spoiler separate.
The hardner for this can of gold paint got hard yrs ago so we cut it with lacquer thinner and just did it.
Some of the black pulled off with the tape but it is under the spoiler


bYJsNQrhQzCEhcv080lerg.jpg
i4Hy8zSMTD+UYkT9wa5%Dg.jpg
qVKpk7HpQ12mjlM4WRfZlg.jpg

It kind of looks like it was painted in the driveway, but whatever.
Then we drove it sans spoiler and got some ice-cream.
Let that paint dry at speed:D:cautious:;)
Same can of gold with 8 yrs between uses so not a great match.
But its done finally.
tuHDwx3dTLe0IIbJh0OgRA.jpg
 
  • Like
  • Hell Yeah!
Reactions: 2 users
Want to put spoiler back on, but half the mounting studs are broken again.

The urethane repair kit was wimpy as to its ability to hold the studs in place.
So on to 5 min epoxy and glue em on again. Glue them, clamp them, tape them, just do something to make it work.
Should buy a fiberglass one cuze this one grows and shrinks so much in the sun.

%3MP0fmsSEqYTQySzdiJag.jpg
 
  • Like
Reactions: 1 users
Put that spoiler on and just took up slack on bolts, no tightening. Hope it lasts another year.

Look how nice the new paint beads up those rain drops


IMG_7980.jpg
 
  • Like
Reactions: 3 users
Amazon product ASIN B001JT1EEMView: https://www.amazon.com/3M-04747-Duramix-Super-Adhesive/dp/B001JT1EEM/ref=sxts_sxwds-bia-wc-p13n1_0?cv_ct_cx=3m+super+fast+repair+adhesive&dchild=1&keywords=3m+super+fast+repair+adhesive&pd_rd_i=B001JT1EEM&pd_rd_r=95ffbe78-2ce3-45f3-adb1-f810bf49c3e3&pd_rd_w=oxote&pd_rd_wg=r9cqn&pf_rd_p=39765fd1-ffee-45e9-8f18-3372ad113070&pf_rd_r=5HPA59WGB5EVH1CYW47Q&psc=1&qid=1591357072&sprefix=3m+super+fas&sr=1-1-191b1ae3-0539-4250-ad39-b698e0b800f6


Amazon product ASIN B00596QVHGView: https://www.amazon.com/3M-38191-Static-Cartridges-Nozzles/dp/B00596QVHG/ref=pd_aw_fbt_img_2/135-5977630-3723969?_encoding=UTF8&pd_rd_i=B00596QVHG&pd_rd_r=5e719923-3991-49a4-ba12-a54323a5c6ff&pd_rd_w=f87nr&pd_rd_wg=8up7o&pf_rd_p=f34f941f-c8a2-45ca-bc95-3c77f31adeb0&pf_rd_r=P438SDJYEM1KTVD57BTP&psc=1&refRID=P438SDJYEM1KTVD57BTP


Amazon product ASIN B07JMXTBW6View: https://www.amazon.com/Dispenser-50ml-Dispensing-Impression-Mixing/dp/B07JMXTBW6/ref=pd_aw_fbt_img_2/135-5977630-3723969?_encoding=UTF8&pd_rd_i=B07JMXTBW6&pd_rd_r=6837b83a-4748-4b51-82dc-4edaba717efe&pd_rd_w=Kq5H7&pd_rd_wg=uLoQq&pf_rd_p=f34f941f-c8a2-45ca-bc95-3c77f31adeb0&pf_rd_r=1265CW6CTHCGE1W44JVY&psc=1&refRID=1265CW6CTHCGE1W44JVY


This is what we used at Carmax for repairs on plastic/fiberglass/urethane/etc.

It is INSANELY strong once cured, and sandable and paintable as well when the situation calls for it. I've seen cars with spoilers that were repaired with this stuff minutes before go through the car wash without issues. I've used it to fabricate missing tabs on interior plastics and plastic bumpers out of thin air.
 
  • Like
Reactions: 1 users
I had the same issue with the mounting studs and used a 2 part epoxy similar to what @74stang2togo just mentioned. I even tried Gorilla Glue, but I couldn't tell you now if that actually worked or not and I had to use the epoxy afterward. But the 2 parter seems the better way to go.
 
  • Like
Reactions: 1 user
I don't think anything will hold with how much this spoiler curls and flattens everyday

Always moving.

I think the 3M stuff is probably far superior to the 5 min epoxy i used