62 falcon with Fox guts build

a91what · Jun 26, 2020

Very cool, we are working on a 73 falcon wagon right now... we plan to do the mustang 2 conversion as well

Mr.Kelley · Jun 26, 2020

It had already been removed from the intake donor and was just laying there. I new I'd be needing one so I snagged it. I know it's kind of ugly but the nice thing is nothing is bolted to the timing cover or water pump so I can do my cam swap without removing the alternator or AC compressor.

Mr.Kelley · Jun 26, 2020

See quick and easy. Well on the engine stand anyway.

2Blue2 · Jun 26, 2020

Mr.Kelley said:
It had already been removed from the intake donor and was just laying there. I new I'd be needing one so I snagged it.

Best part is it is already paid for. Besides its looking better already with the clean up.

Mr.Kelley · Jun 26, 2020

Any guesses on what kind of HP it will make. Specs are stock 88 car block and pistons, E5 heads, 91 HO cam and lifters, 2000 ish Explorer intake and fuel system, iron exhaust manifolds, running on an 8LD ECU through a Painless stand alone harness. My guess is around 200HP but not over.

Noobz347 · Jun 26, 2020

General karthief said:
That ac bracket would give me the hebegeebees or at least a WTF reaction all hang'n out in mid air like that.
You couldn't use a fox bracket to bring it in closer to the engine?
I'm not criticizing, but it does look odd.

I would have mounted the machine gun there.

Mr.Kelley · Jul 3, 2020

Today I tackled the other end of the swap and got my fuel tank installed, fill tube in, and gas cap mounted.

2Blue2 · Jul 3, 2020

Gas cap is cool!

What is it? Mini Lemans? Boat?

General karthief · Jul 3, 2020

Ahhh, maybe a 62 Falcon?

Mr.Kelley · Jul 3, 2020

The tank is from FAS and is a 12gal. The cap came from Speedway. Got it as a package deal along with fill hose, straps, fill spout, and some other stuff. The plan is to replace the old tank with a spare tire well.

Mr.Kelley · Aug 29, 2020

One step closer. I test fired it spraying carb cleaner and it made good noises. I need to roll the engine out next to the car so the fuel line will reach, connect the line and fuel pump wire and see if it will idle and rev. Then it's pull the 250 out drop the 5.0 in, weld in my prefabbed mounts, tidy up the new wire harness, mount the ECU, and drive it.

General karthief · Aug 29, 2020

More pics

Mr.Kelley · Sep 2, 2020

As requested

View: https://www.youtube.com/watch?v=TD7O9BvwpYo

HemiRick · Sep 3, 2020

I have a 63 Ranchero w a old school 302 and 4 sp toploader. Front disk brakes from up to a 79 will bolt right right on. I got mine from a 79 Mercury Monarch. Also do the Shelby mod to lower the upper front control arms.....My Ranchero handles great for what it is.

Gearbanger67 · Sep 3, 2020

Cool project, keep the updates coming please.

Mr.Kelley · Sep 3, 2020

HemiRick I already have a Mustang II front end in it, and it does handle great. Your ranchero brings back memories

Mr.Kelley · Sep 3, 2020

Mr.Kelley · Sep 18, 2020

The engine goes in this weekend. Pictures to follow

General karthief · Sep 18, 2020

Mr.Kelley · Sep 21, 2020

Well the weekend engine swap did not go as planned. I have a couple of clearance issues that need resolving. I need to roll the rack and pinion back to lower the steering shaft, the right exhaust manifold hits the frame rail while the explorer upper plenum hits the brake booster. I found that a Datsun B210 booster is only 5 1/2" in diameter so I ordered one. I'll see if I can make that work. I know R&P brackets are out there and it's just some more welding after that. I did take a couple pics but nothing helpful to anyone watching.

62 falcon with Fox guts build

SendMeUrDataLog

Active Member

Active Member

will be trying this sex one when I can find it

Active Member

Stangnet Facilities Maint Tech... Er... Janitor

Active Member

will be trying this sex one when I can find it

wonder how much it would cost to ship you a pair

Active Member

Active Member

wonder how much it would cost to ship you a pair

Active Member

I'd be looking at jacking under the house

Active Member

Active Member

Active Member

wonder how much it would cost to ship you a pair

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency