Progress Thread 88 GT roller build.... for 10 years

DeathProof88 · May 16, 2023

I got my TKX yesterday!

limp · May 16, 2023

DeathProof88 said:
I got my TKX yesterday!

Which ratio tranny did you get?? TKX with 3:50 gears in my diff..... .68 fifth... I think it will be a good all around set up.....

DeathProof88 · May 16, 2023

I went with the. 71 OD and I have 3:55 gears.

DeathProof88 · May 29, 2023

Today I replaced the trac loc and the pinion seal.. however, the shims I took out were .062 and the ones that were supplied were .030,.035, and .040.. I tried .040 first and I couldn't get the S spring back in so I went with the. 035. Besides that, everything was a breeze and I have a beer in my stinky, stinky hands lol! Have a great memorial day guys.

nickyb · May 29, 2023

So we're did you order your t k x from?
What bell did you get?
Did you buy a new crossmember or modify the t5 one?

limp · May 29, 2023

nickyb said:
So we're did you order your t k x from?
What bell did you get?
Did you buy a new crossmember or modify the t5 one?

I purchased my TKX from Summit... My car came with a 4 speed SROD so the bell fit the TKX.....
I used the Stifflers crossmember.. My stock crossmember was for a single exhaust.. ( 83).....

DeathProof88 · May 29, 2023

I got the trans from American muscle because it was free shipping, I already had an explosion proof bellhousing (lakewood I think) and I have the stock crossmember but I'm going to buy the stifflers tubular member because I'm missing the bushings and hardware anyway.

limp · May 29, 2023

MIne went from this to this

nickyb · May 29, 2023

Thanks for the info guys, I'll probably modify my xmember , I'm on the fence as weather to get a cast bell or steel bell($500 ) difference.
Also wondering if a can get a 31 spline yoke from the pic a part( what year stang came with them?)

rednotch · May 29, 2023

limp said:
MIne went from this to this

I hope you kept or cleaned up and reused that old bell housing..

limp · May 29, 2023

rednotch said:
I hope you kept or cleaned up and reused that old bell housing..

Don't you think those bellhousings look alike except dirty/clean?

rednotch · May 29, 2023

limp said:
Don't you think those bellhousings look alike except dirty/clean?

They all look alike from that angle lol.. I have a few of those in the garage I need to move out of my way.. But ya some still don't know its the same machine work the tremec bells get vs the t5.. There all the same casting.

DeathProof88 · May 29, 2023

nickyb said:
Thanks for the info guys, I'll probably modify my xmember , I'm on the fence as weather to get a cast bell or steel bell($500 ) difference.
Also wondering if a can get a 31 spline yoke from the pic a part( what year stang came with them?)

My bellhousing came with the car, but he used it because the track required an SFI bellhousing. And my axles are from an SN95

DeathProof88 · Jan 7, 2024

It's a good day for an update. I got alot done since my last post (even tho it doesn't look that way). My TKX is in. I had to use a 1/2" reamer to open up the 4 holes to the bellhousing. I found out that I have a mcloud and they take 1/2" bolts. Driveshaft mounted but I want to change the u joints. I have an alternator now(need to order a 2g cable still), which let me figure out a belt. Rad and fan are in. I flushed the nasty old brake fluid. Now I have the gas tank out, pressure washed, and waiting for my 255 walbro and all the rest of the parts to freshen that area up. Next on the list is the cobra style coolant crossover pipe, all new hoses, and fill with water to pressure test.

DeathProof88 · May 11, 2024

Another happy day of progress. We've now got a set of Cobra brakes thanks to you guys helping me in another thread. I could've got the car running for the same money but I'm really excited about it. Excuse the mess.

AeroCoupe · May 11, 2024

Are those a set of SouthSide lift bars???

DeathProof88 · May 11, 2024

AeroCoupe said:
Are those a set of SouthSide lift bars???

They came on the car when I got it, I've been curious about them actually.

AeroCoupe · May 11, 2024

I had them on my T-Bird but that was years ago.

DeathProof88 · Jun 20, 2024

My Terminator X kit came! If you guys don't know, the "F" kit is back. I got it from scram speed for 1250!

Noobz347 · Jun 20, 2024

Well uhh.... Fkit then.

Progress Thread 88 GT roller build.... for 10 years

Active Member

Attachments

wrap a little cheese around it and its a done

Active Member

Active Member

I gotta say i never painted my nuts, Never Ever

wrap a little cheese around it and its a done

Active Member

wrap a little cheese around it and its a done

I gotta say i never painted my nuts, Never Ever

I'd like to remain having one chocolate starfish

wrap a little cheese around it and its a done

I'd like to remain having one chocolate starfish

Active Member

Active Member

Attachments

Active Member

Attachments

lube between the nut and the face. I know my lubes

Active Member

lube between the nut and the face. I know my lubes

Active Member

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency