• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

89 lx head swap

  • Thread starter Thread starter check
  • Start date Start date Aug 5, 2007
C

check

New Member
Dec 2, 2004
6
0
0
Aug 5, 2007
#1
  • Aug 5, 2007
  • #1
need alittle info 89lx rebuilt stock bottom end ive got world product heads the jrs flow 185 1.60/1.94 valvles 58 cc anyway what would the best cam be injector size and intake to use i wont be driveing everyday i will be using 4.10 gears with 5 speed trans and will i need to have ecu reprogramed
thanks your help
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 5, 2007
#2
  • Aug 5, 2007
  • #2
I would go with the TFS 1 cam. 24lb injectors with a mass air meter that is set up for the 24's. That way you don't have to have the ecu reprogramed.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Aug 5, 2007
#3
  • Aug 5, 2007
  • #3
You won't need anything tuned, but it wouldn't hurt. Many, including myself, drive around for years with no tune...

A custom cam is the best way to go, most of the cams run around the $275-$350 range. I would prefer Ed Curtis at www.flowtechinduction.com or Buddy Rawls at rawls1103@aol.com.

A TFS1 would be fine though...
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 5, 2007
#4
  • Aug 5, 2007
  • #4
5spd GT said:
You won't need anything tuned, but it wouldn't hurt. Many, including myself, drive around for years with no tune...

A custom cam is the best way to go, most of the cams run around the $275-$350 range. I would prefer Ed Curtis at www.flowtechinduction.com or Buddy Rawls at rawls1103@aol.com.

A TFS1 would be fine though...
Click to expand...

I can't see spending that much money on a cam for a stock bottom end motor. The only way i would spend that much is if i was running a turbo, supercharger, stroker, or spray. TFS 1 cam is only $160.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Aug 5, 2007
#5
  • Aug 5, 2007
  • #5
88mouse said:
I can't see spending that much money on a cam for a stock bottom end motor. The only way i would spend that much is if i was running a turbo, supercharger, stroker, or spray. TFS 1 cam is only $160.
Click to expand...

I'd pay the extra $160 bucks to get better driveability, better power, better vacuum, and a better matching piece with the professional advice.

The cam is very important to the engine.

If spending the extra $160 isn't worth that to you, that is fine by me...it is just not the choice I make.

I don't think just because your engine doesn't have extra stroke, that you should cheap on a cam.

I don't find anything wrong with the TFS1, it is a great bang for the buck and well proven.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 5, 2007
#6
  • Aug 5, 2007
  • #6
5spd GT said:
I'd pay the extra $160 bucks to get better driveability, better power, better vacuum, and a better matching piece with the professional advice.

The cam is very important to the engine.

If spending the extra $160 isn't worth that to you, that is fine by me...it is just not the choice I make.

I don't think just because your engine doesn't have extra stroke, that you should cheap on a cam.

I don't find anything wrong with the TFS1, it is a great bang for the buck and well proven.
Click to expand...

Well to each his own. But IMO i can't see spending that much on a cam. There are way to many cams out there to have one made for a motor with only a intake and heads.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Aug 5, 2007
#7
  • Aug 5, 2007
  • #7
88mouse said:
Well to each his own.
Click to expand...

 

dcurtis

10 Year Member
Jan 19, 2006
688
7
39
Aug 5, 2007
#8
  • Aug 5, 2007
  • #8
Anderson N-41
 
C

check

New Member
Dec 2, 2004
6
0
0
Aug 6, 2007
#9
  • Aug 6, 2007
  • #9
thanks for your imput on head swap i will do some research on these items thanks again
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Thoughts on Camshaft for a build with stock bottom end and aluminum heads with 2.02 I 1.60 Ex. closed chamber 64cc heads.
  • Wdshook
  • Jan 14, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 16, 2024
Wdshook
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
14K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
Drivetrain T56 Magnum Install '89 Fox
  • CHILL347
  • Nov 1, 2019
  • Fox 5.0 Mustang Tech
  • 2
Replies
34
Views
14K
Fox 5.0 Mustang Tech Feb 11, 2026
AeroCoupe
JCBeaver's 1993 GT Coyote Swap "The Never-Ending Project"
  • JCBeaver
  • Aug 13, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 8 9 10
Replies
182
Views
36K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 2, 2020
JCBeaver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?