Progress Thread '93 Kenne Bell Notch

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
No, there's just a chance the wheel won't hold air when you go to mount your tires up to them. But since they are holding fine with whats on them already they should be fine but was worth mentioning. Also if your fine with it you could always use it as a concern when discussing purchase price :)

Center caps wouldn't effect anything except maybe price
Thanks for the info! I think I'm going to end up buying them then. Maybe I can figure out some way to cover where the centercaps should be. I'll definitely bring up the drill holes and try to get him to lower his asking price.
 
  • Like
Reactions: Boostedpimp
  • Sponsors(?)


Boostedpimp

15 Year Member
May 8, 2003
1,030
343
114
NJ
Thanks for the info! I think I'm going to end up buying them then. Maybe I can figure out some way to cover where the centercaps should be. I'll definitely bring up the drill holes and try to get him to lower his asking price.
Caps can be found on ebay etc
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
15 Year Member
Nov 29, 1999
9,174
6,951
234
62
Birmingham, al
m.imdb.com
I guess it depends. You could give me a set of convo pros, and I wouldn't run them.
Even if the car was on blocks.

To me, a 15" wheel dates the car. And riveted Center line wheels just scream 1990. They were never that popular when they were new. Unless you like them, throwing 250 at them means that you have that much more invested in a set of wheels you like when it comes time to replace those turds.
 

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
I guess it depends. You could give me a set of convo pros, and I wouldn't run them.
Even if the car was on blocks.

To me, a 15" wheel dates the car. And riveted Center line wheels just scream 1990. They were never that popular when they were new. Unless you like them, throwing 250 at them means that you have that much more invested in a set of wheels you like when it comes time to replace those turds.
Yeah I hear ya, i go back and forth on the look i ultimately want. Some days i like the look of big radials in the back and some days i think it would look better with some regular street tires and wheels. My plan was to get this guy to sell them for cheaper and maybe I can clean them up and change the color of them to black.

I wouldnt feel bad buying them for $150 and having them as an extra set I can rotate on and off.
 

Olivethefet

Slap me as well as point and laugh
May 17, 2018
1,798
1,248
123
40
Enterprise AL
I'm having trouble imagining them black. I dont think they would look very good black. A cheap extra set of wheels could be nice. I dont race, so I've never had a need for an extra set just taking up space. I'd save and get something you really want in the end.
 
  • Like
Reactions: James V

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
I'm having trouble imagining them black. I dont think they would look very good black. A cheap extra set of wheels could be nice. I dont race, so I've never had a need for an extra set just taking up space. I'd save and get something you really want in the end.
You know I think you guys have convinced me. The money I spend on these wheels + paint + tires for them can go towards a full package deal of wheels I 100% like. I mainly wanted them because they are 4 lug and I wanted radials in the rear.
 

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
20190606_200853.jpg


This is probably an obvious one to you guys but was curious what this golden bell looking part above the oil filter is for?

Also is this power steering bracket stock? I'm just about to put on the PS relocation kit since I deleted my AC.
20190606_200953.jpg
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
17,170
5,491
193
polk county florida
That 'golden bell ' is your oil pressure sender.
not sure about the ps bracket, 94-5 maybe?
i'm a fox guy and that pulley looks like a 94-5 to me.
i've been wrong before though, don't tell anyone!
 
  • Like
Reactions: James V

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
That 'golden bell ' is your oil pressure sender.
not sure about the ps bracket, 94-5 maybe?
i'm a fox guy and that pulley looks like a 94-5 to me.
i've been wrong before though, don't tell anyone!
Thanks, looks like I'll have to buy the proper fox bracket to make the relocation kit work.
 

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
20190607_203042.jpg


Never would have imagined all the things I had to correct with this car but I guess 25 years of multiple people messing with things explains it. This power steering relocation has taken a few setbacks. Just noticed there's a stripped bolt in one of the thread holes for the bracket. I'm going to try and get it out but I might be able to get by with just tightening the other 2.
 

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
20190614_191630.jpg


Finishing up my PS pump install. My question is where do I connect the ground from the battery, where this yellow arrow I drew is? If not what is that thread there for and if so, does anyone know what size bolt I need to connect it?
 

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
20190615_072707.jpg


Guys I'm stuck again. I'm trying to hook everything back up. The new pump has this nut in it already, do I remove it and thread in the old pressure hose fitting? I took off the blue cap and it doesnt screw in that way. Also do I need to put an o ring on the end of the fitting that goes into the pump?
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
17,170
5,491
193
polk county florida
I believe the fitting on the end of the hose is the same one that is in the pump, you will have to take that fitting off the hose then you can install the hose to the pump. The hose fitting looks like it has been rounded off, that may be why the hose fitting and the pump fitting are still together, I would get a new high pressure hose.
 
  • Like
Reactions: James V

James V

Active Member
Feb 26, 2017
409
146
53
26
Connecticut
Just ordered a new power steering pressure hose, will be installing it later today. Cant wait to get back on the road. I still have to track down a 3/8 18 × 1" bolt for the ground to block.
 
Thread starter Similar threads Forum Replies Date
M Need help tuning megasquirt with kenne bell supercharger Digital Self-tuning Forum 9
Gokie Pokie WTB/Trade Kenne Bell for 302 Engine and Power Adder 0
O Kenne Bell 2.1 Supercharger for Daily Driver 1996 - 2004 SN95 Mustang -General/Talk- 37
Scott7512 Kenne bell Panhard bar 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
James V Fox Is there a way to identify Kenne bell supercharger? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
K For Sale 2000 GT/03 Terminator Clone, Kenne Bell Blower 309 ci. SN95 Mustangs For Sale (1994-04) 0
LONN17 For Sale SN95 Kenne Bell 1.5L Supercharger Engine and Power Adder Parts 6
A Any 2001 Bullitt Kenne Bell Owners? 1996 - 2004 SN95 Mustang -General/Talk- 1
0 1990 Mustang Gt Convertible - Kenne Bell - Finally Done! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
H Strut Brace Over Kenne Bell 2.6l Supercharger? 2005 - 2014 S-197 Mustang -General/Talk- 0
J Kenne Bell Install - Squeaky Belt - Solved 2015+ (S550) Mustang -General/Talk 16
Bullitt347 SOLD 2.1l Kenne Bell S/c With Inlet/outlet Manifolds Engine and Power Adder 4
Rickyll7 Expired Kenne Bell Boost A Pump Kb Bap 40 Amp Engine and Power Adder 0
M Compression Help!! The Welcome Wagon 17
S SOLD Kenne Bell Supercharged Ford Mustang Gt Deluxe S197 Mustangs For Sale (2005-14) 0
R Kenne Belle Build 1996 - 2004 SN95 Mustang -General/Talk- 4
R Expired Kenne Bell Boost A Pump Engine and Power Adder Parts 0
O Expired Kenne Bell Bap Other Classifieds 0
dwbro1 Water Mixed With Oil In Kenne Bell 1.5l 1994 - 1995 Specific Tech 7
S 98 Cobra Kenne Bell Injector Size??? 1996 - 2004 SN95 Mustang -General/Talk- 4
B Expired Kenne Bell 2012 Gt 771 Whp S197 Mustangs For Sale (2005-14) 0
B Help!! Kenne Bell Installed Tuning Problems SN95 4.6L Mustang Tech 12
T Forced Induction Teaser.. World's First Kenne Bell Powered 2015 Gt! 2015+ (S550) Mustang -General/Talk 0
D Expired 2.6 Kenne Bell Engine and Power Adder 0
J Coyote Engine/kenne Bell Supercharger Question 2005 - 2014 S-197 Mustang -General/Talk- 17
FoxMustangLvr Progress Thread My 90 Lx Hatch - Cobra Irs_ Kenne Bell Twin Screw'd 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1848
danno Wtf Over Kenne Bell Snout Drive Not Lining Up 1996 - 2004 SN95 Mustang -General/Talk- 0
jastang 2.8l Kenne Bell Mammoth On 97 Gt. Anyone Done It? 1996 - 2004 SN95 Mustang -General/Talk- 5
danno Just Bought 03 Gt What's The Best Kenne Bell Sc Setup The Welcome Wagon 2
M Kenne Bell 6 Psi Super Chargers Need Advice Fox 5.0 Mustang Tech 17
what9612 How I Did My 1.7 To 2.2 Kenne Bell Swap 2v 1996 - 2004 SN95 Mustang -General/Talk- 1
P New Guy - 2004 Mach 1 With Kenne Bell 2.1 The Welcome Wagon 3
F Will A Kenne Bell 1.5l Supercharger Be Too Small For My Build?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 12
Rickyll7 SOLD 40 Amp Kenne Bell Boost-a-pump Kb Bap For Boosted Cars Engine and Power Adder Parts 3
5 SOLD 2000 Mustang Gt (2.1 Kenne Bell, Stroker, Suspension Etc..) SN95 Mustangs For Sale (1994-04) 3
Bojingles Forced Induction Kenne Bell Boost Gauge Install 2010 - 2014 Specific Tech 0
SRT Handz Sn95 Kenne Bell 2.1 Twin Screw Supercharger Sounds *video* 1996 - 2004 SN95 Mustang -General/Talk- 5
C Expired 1996 Mustang Cobra, Black, 21k Miles, Kenne Bell Supercharged, Like Brand New, Las Vegas SN95 Mustangs For Sale (1994-04) 1
M Expired 96-98 Kenne Bell 2.1 Supercharger Kit Engine and Power Adder Parts 0
waynebuilt SOLD Kenne Bell 1.7 Supercharger Kit Engine and Power Adder Parts 0
waynebuilt Expired 98 Cobra Longblock 2.1 Kenne Bell With Extra's Engine and Power Adder Parts 2
B Expired 00/03 Cobra Clone Fully Built Street/track Monster Kenne Bell SN95 Mustangs For Sale (1994-04) 4
O SOLD Bay Area Ca :: 2002 Mustang Gt Kenne Belle 6psi Carb Legal Setup 35k Miles SN95 Mustangs For Sale (1994-04) 0
toxzzic1 Engine Which Kenne-bell?? SN95 4.6L Mustang Tech 21
2003cobra2747 2.1 Kenne Bell 95 Cobra Electrical Prob. 1994 - 1995 Specific Tech 3
Bojingles Digital Tuning Kenne Bell Tuning 2010 - 2014 Specific Tech 0
F SOLD 2007 Mustang GT/CS - ***463 RWHP*** - Kenne Bell Supercharger S197 Mustangs For Sale (2005-14) 1
J Expired kenne bell 2.6 05-09 Engine and Power Adder 9
KB00GT Kenne Bell blown GT in Kansas The Welcome Wagon 2
M Getting Opnions Wipple 4.0L VS Kenne Bell 2.8L Mammoth SVT Tech Forum 0
Similar threads