afr 185cc heads

[32785stang]

I have a set of afr 185cc heads and the springs that come with them are only good to .550 lift. i have a comp cam with .570 lift, does anybody know what springs i should get and where....i dont want to grind the heads either

 

[86bluecobra]

best bet would be to phone arf's tech line and ask them.

 

[1991vert]

email ed curtis?

 

[32785stang]

who is that?

 

[1991vert]

www.flowtechinduction.com he's a custom cam grinder and his other job is being "the man" when it comes to valvetrain stuff

 

[2KsilverGT]

I bought the AFR upgraded springs. I would contact Ed C cuz I had to have the spring pockets cut to get the AFR's to fit. However I only paid 50 bucks for the springs and retainers and then sold the factory AFR springs on ebay for 40 bucks. 10 bucks in upgraded springs...

 

[r.barn5.0]

Not sure what springs I have on my 185's but they are......

running .579 lift and they have 145lbs seat pressure

125 is stock if i remember right.

 

[89white50]

do you have the cam card for the camshaft? it should give a recommended spring, pressure, installed height, load, all that. or call comp cams directly and ask them, that would be the best thing you could do.

 

[ls1beater4eva]

ok well we are discussing afr 185 heads i have a set with a set of blue racer rrs does anybody happen to know about what is the common size push rod to use with these heads.

 

[32785stang]

your gunna have to get an adjustable pushrod to check get correct length