Buying Heads

[Strype]

was just curious, I still love you. <3

Crap I forgot about that...

Reason being is I called my Local Ford Dealer about GT40 P heads and they said $860 a piece...

So that's why I forgot to call Parkway

Dayum it I coulda saved a little money too

 

[DMAN302]

car will put down excellent numbers...my guess is 270 wheel power if you can get her running decent...320 fly wheel is my guess. Either way the car will be gangbusters better.

 

[Strype]

car will put down excellent numbers...my guess is 270 wheel power if you can get her running decent...320 fly wheel is my guess. Either way the car will be gangbusters better.

That would be awesome... It should run great. I can't freakin wait

 

[91ghp5.0]

when do the parts get there? whats the parkway place you guys speak of? so strype, the heads (assembled with valves and springs) were 900? that seems low to me, but if its true, then holy ****! (from CJ that is). are they lower at this parkway place? maybe i will get heads after all.

 

[Strype]

$1149.90 M6049X305 GT40 X CYLINDER HEAD-COMPLETE HEAD 58CC CHAMBER
$179.95 M625B303 CAMSHAFT-1985 AND LATER 302 ROLLER CAM
$324.95 M6564E351 ROLLER ROCKER ARM-1.70:1 RATIO BOLT ON DESIGN
$119.95 BBK1606 ELECTRIC FUEL PUMP KIT-190 LPH BBK
$119.95 FMS-M-6500-R302 Lifters, Hydraulic Roller, Ford, Set of 16
$38.88 FMS-M-6565-L302 Pushrods, Steel, 5/16 in. Diameter, 6.272 in. Length, Ball Ends, Hardened, Set of 16 FMS-M-6582-L302
$99.95 Valve Covers, Tall, Cast Aluminum, Black, Ford Racing Logo, Ford, Small Block, Pair
$169.95 SHORTY HEADERS 86/93 5.0L 1-5/8" PRIMARY (MAC) E508692 01
$550.00 BBK SSI Intake
$212.00 Taurus Fan 1995
----------
Plus shipping & tax...
$3,056.43


Plus, at the house I have MAC full exhaust set, FMS 3.73's, MAC or BBK Subframes, fuel pressure regulator, fuel pressure guage, S&B Ketchup Induction








My wife's going to MURDER me. I feel a little bad now I don't have the money for the install

Oh well

What should I buy the wife???

 

[pistonhead351]

dont forget a gasket set and a timing chain. and new headbolts or studs. im positive that you could install all of that stuff yourself and save 600 bucks. i also have a new motor waiting to go in. ported trickflows, stage 2 cam and a eddy rpm2 intake. woohoo

 

[DMAN302]

$1149.90 M6049X305 GT40 X CYLINDER HEAD-COMPLETE HEAD 58CC CHAMBER
$179.95 M625B303 CAMSHAFT-1985 AND LATER 302 ROLLER CAM
$324.95 M6564E351 ROLLER ROCKER ARM-1.70:1 RATIO BOLT ON DESIGN
$119.95 BBK1606 ELECTRIC FUEL PUMP KIT-190 LPH BBK
$119.95 FMS-M-6500-R302 Lifters, Hydraulic Roller, Ford, Set of 16
$38.88 FMS-M-6565-L302 Pushrods, Steel, 5/16 in. Diameter, 6.272 in. Length, Ball Ends, Hardened, Set of 16 FMS-M-6582-L302
$99.95 Valve Covers, Tall, Cast Aluminum, Black, Ford Racing Logo, Ford, Small Block, Pair
$169.95 SHORTY HEADERS 86/93 5.0L 1-5/8" PRIMARY (MAC) E508692 01
$550.00 BBK SSI Intake
$212.00 Taurus Fan 1995
----------
Plus shipping & tax...
$3,056.43


Plus, at the house I have MAC full exhaust set, FMS 3.73's, MAC or BBK Subframes, fuel pressure regulator, fuel pressure guage, S&B Ketchup Induction








My wife's going to MURDER me. I feel a little bad now I don't have the money for the install

Oh well

What should I buy the wife???

Blender and new apron..

 

[Strype]

dont forget a gasket set and a timing chain. and new headbolts or studs. im positive that you could install all of that stuff yourself and save 600 bucks. i also have a new motor waiting to go in. ported trickflows, stage 2 cam and a eddy rpm2 intake. woohoo

May give it a try

I need to go to Ford to get the headbolt set... know which ones I need???

Blender and new apron..

I've got my friends telling her to "Get in the kitchen and make me a sammich"

She's not so happy about that joke

 

[91ghp5.0]

damn. it isnt the heads that kill you, its all the other crap you need. why did you spend so much on roller rockers?

 

[pistonhead351]

uhh im not sure of the exact part number but there ARP and there only like 40 bucks on summit.

 

[Strype]

damn. it isnt the heads that kill you, its all the other crap you need. why did you spend so much on roller rockers?

Well ya see...


They were there, I was there, we kinda glanced at each other... you know the story


Either that or I'm an idiot who doesn't know what in the POOP he's doing.


Take your pick

 

[mattmcdan]

when do the parts get there? whats the parkway place you guys speak of? so strype, the heads (assembled with valves and springs) were 900? that seems low to me, but if its true, then holy ****! (from CJ that is). are they lower at this parkway place? maybe i will get heads after all.

Parkway Ford
Adairsville, GA
Joe Charles,
ext 120: 888-FORD-SVT

They sell em for $989/pair ready to go! And you are buying from Ford, so that makes it better.

 

[mattmcdan]

Well ya see...


They were there, I was there, we kinda glanced at each other... you know the story

Oh man, that statement works in so many ways, thats how I end up with alot of my stuff.

 

[91ghp5.0]

Well ya see...


They were there, I was there, we kinda glanced at each other... you know the story


Either that or I'm an idiot who doesn't know what in the POOP he's doing.


Take your pick

harland sharps on jegs are a little over 200 (1.6), arent they?