I need to know what the stock specs are for the capacitor inside the turnsignal flasher unit. Mine was altered by the PO and the specs on it are 10mF 50v. This makes the signals switch every 3 times as long! That's way too slow!
I have a factory I flasher from an '03 that I opened. It has a value of 3.3 microFarads. The positive (+) end connects to pin 2 on the IC, as well as to one of the flasher terminals.
I have a factory I flasher from an '03 that I opened. It has a value of 3.3 microFarads. The positive (+) end connects to pin 2 on the IC, as well as to one of the flasher terminals.
