Do I need injectors?

tillmanspeed

New Member
Jun 4, 2006
24
0
0
I just purchased this car and wondering if injectors would be a good idea. Seems to be no problems, but I don't know if I need them or not.

I have a jasper "stage i" is what they call it... 306 cid... roush 200 heads... upper/lower intake, pulleys, 70mm throttle body, spacer, mac headers, off road h pipe, flowmaster cat back, 373s, etc.

I have a 220LPH walbro pump and kirban fuel pressure regulator... should I swap to 24 lb injectors, or does anyone have a reccomendation? I believe it also has a superchip as well...

Chris
 
If you swap injectors, you will need to change the MAF or have it recalibrated. If you have a C&L MAF, you would need to swap the sample tube.
 
Let me go see what MAF he put in this thing...

The number off the sensor is E92F-12B579-AA and under that AFH55-03 it appears to be stock, its new, but I think a ford replacement... it says ford on it. Same with the housing... its new, but I think its the stock ford replacement...

And my injectors say... E6TE-A38 and they appear to be brand new as well... don't know what they are though... I guess thats a motorcraft number?

I got a 70mm Prof Products throttle body and spacer... and it looks like a BBK or mac fenderwell cold air. Into a Prof Products typhoon upper and lower intake.

Let me know if anyone knows anything!

Thanks for all your help!

Chris
 
I guess I may have to bring these numbers to Ford and see what they can do with them? Looks like this thing has aftermarket chrome fuel lines and possibly rails as well? Could the injectors be 38 pounds?