Edelbrock's Victor Jr. 4.6L Intake Manifold

kuwait · Feb 1, 2010

So i got the intake here and the Fuel Rails for it , only thing i noticed is there is lots of parts needed to get the fuel rail to work , which is frustrating for me because i was waiting to slap this baby on

i tried a mock up install with the stock and Edelbrok , i think it possible to use the stock ones , but there is no way to screw tighting it without some kind of a bracket , here it is , tell me if you think its possible to work with stock.

98COBRA281 · Feb 1, 2010

im sure that you could make some brackets, ive seen it done befor, but the edelbrock rails look good

04GTBLKVERT · Feb 1, 2010

Let me know how your install goes because I am putting my on Saturday.

1fun281 · Feb 1, 2010

98COBRA281 said:
im sure that you could make some brackets, ive seen it done befor, but the edelbrock rails look good

I forgot what your motor looked like when its actually together

Deleted member 38176 · Feb 1, 2010

98COBRA281 said:
im sure that you could make some brackets, ive seen it done befor, but the edelbrock rails look good

God your motor is sex

kuwait · Feb 1, 2010

thanks for the install pictures 98COBRA281 , they do look awesome on your car , wish my engine bay would look this clean , id be cruising without a hood on

and 04GTBLKVERT ill be putting mine this friday , ill update thread with pics.

98COBRA281 · Feb 1, 2010

1fun281 said:
I forgot what your motor looked like when its actually together

you should see it now... i pulled the timing cover off today

thanks nightfire

kuwait · Feb 1, 2010

98COBRA281 said:
you should see it now... i pulled the timing cover off today

you should tell them why

98COBRA281 · Feb 1, 2010

kuwait said:
you should tell them why

MHS stage 3.5 NPI cams, matched cams gears, and TFS adjustable crank sprockets

kuwait · Feb 1, 2010

98COBRA281 said:
MHS stage 3.5 NPI cams, matched cams gears, and TFS adjustable crank sprockets

really hope you get your goal , its not too far and with the cams and the high revs i could see it happening , please do inform us when you get it running , this is one project i am keeping a close eye on because its an interesting build , not to mention one clean and sick car

98COBRA281 · Feb 1, 2010

kuwait said:
really hope you get your goal , its not too far and with the cams and the high revs i could see it happening , please do inform us when you get it running , this is one project i am keeping a close eye on because its an interesting build , not to mention one clean and sick car

thanks man, it made 320rwhp@ 6k where the cams peaked, and ran out of fuel, with the big cams, and the extra 1000 rpm, it should be a great combo with the manifold, im also going to order the 6061.com upper plenuim, so that should help some too!

ninjastang125 · Feb 1, 2010

If you dont mind me asking cobra what are you "goals"?

Tim2002GT · Feb 1, 2010

98COBRA281 said:
thanks man, it made 320rwhp@ 6k where the cams peaked, and ran out of fuel, with the big cams, and the extra 1000 rpm, it should be a great combo with the manifold, im also going to order the 6061.com upper plenuim, so that should help some too!

That will look killer! How much do those plenums cost?

98COBRA281 · Feb 1, 2010

ninjastang125 said:
If you dont mind me asking cobra what are you "goals"?

350+ RWHP N/A NPI, and high 11's

Tim2002GT said:
That will look killer! How much do those plenums cost?

about $225, i think thats a good price, and wish i would have bought it in the first place

Mr. Rustypwnz · Feb 1, 2010

that sucker will rip!!!

1fun281 · Feb 2, 2010

98COBRA281 said:
MHS stage 3.5 NPI cams, matched cams gears, and TFS adjustable crank sprockets

Which means im getting cams soon

trombonedemon · Feb 2, 2010

Tim2002GT said:
That will look killer! How much do those plenums cost?

That plenum w/the welding bead looks Gourgeuos,

kuwait · Feb 12, 2010

alittle update with the plate and Rails in place

04GTBLKVERT · Feb 12, 2010

Looks good, I was going to get my done but I didn't know you need an adapter for the plenum so I just order it..

nickmckinney · Feb 12, 2010

Anyone interested in getting Edelbrock to design in stock fuel rail use needs to call their tech line and tell them. I pulled some strings and spoke to "da man" there that could get this change done and its something they are now interested in (maybe I was the first to get to talk to the top about it I don't know). Getting a few people to let them know I am not the only one desiring this change could help the cause. That would get this intake down into the $500 range (with a proper elbow) and IMHO they would sell 4 times as many.

Edelbrock's Victor Jr. 4.6L Intake Manifold

kuwait

Member

98COBRA281

04GTBLKVERT

New Member

1fun281

Member

Deleted member 38176

kuwait

Member

98COBRA281

kuwait

Member

98COBRA281

kuwait

Member

98COBRA281

ninjastang125

New Member

Tim2002GT

98COBRA281

Mr. Rustypwnz

Advanced Member

1fun281

Member

trombonedemon

Well-Known Member

kuwait

Member

04GTBLKVERT

New Member

nickmckinney

Member

Similar threads

Edelbrock's Victor Jr. 4.6L Intake Manifold

Member

New Member

Member

Deleted member 38176

Member

Member

Member

New Member

Advanced Member

Member

Well-Known Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency