I'm going to rebuild a 79-81 302. The engine runs good now (stock as far as I know) in my 86 (daily driver). Compared to engine set ups that I've read on here, the following will probably be mild and boring.
I'm gonna take the block .030 over which I understand will change the displacement to a 306. Still deciding on which Pistons to get.
I'm looking at one of the Edelbrock intake and cam packages in Summit.
Performer Intake w/ Hydraulic Cam (Lift .448/.472 Dur.204/214) (Lifters included with cam).
I'm currently running an Edelbrock 650 cfm carb on the eingine.
At this point, I've got to keep the stock heads. From various books that I've got, these heads have a 67.5 - 70 cc chamber
Valve size - 1.78" Int 1.46" Exh
Port Size - 1.94" x 1.04" Int 1.24" x 1.00" Exh
With the above stated, what, if anything, should I do to the heads. Yea I know I need better ones and that is the plan for down the road. (With the wife and kids I kinda take what I can get
)
Also, will the above changes make a noticable/considerable difference in torque/hp or am I just spitting in the wind? It's not for racing, it's just for me to have fun in when I'm driving it. Sorry for being so long winded.
Later
I'm gonna take the block .030 over which I understand will change the displacement to a 306. Still deciding on which Pistons to get.
I'm looking at one of the Edelbrock intake and cam packages in Summit.
Performer Intake w/ Hydraulic Cam (Lift .448/.472 Dur.204/214) (Lifters included with cam).
I'm currently running an Edelbrock 650 cfm carb on the eingine.
At this point, I've got to keep the stock heads. From various books that I've got, these heads have a 67.5 - 70 cc chamber
Valve size - 1.78" Int 1.46" Exh
Port Size - 1.94" x 1.04" Int 1.24" x 1.00" Exh
With the above stated, what, if anything, should I do to the heads. Yea I know I need better ones and that is the plan for down the road. (With the wife and kids I kinda take what I can get
)Also, will the above changes make a noticable/considerable difference in torque/hp or am I just spitting in the wind? It's not for racing, it's just for me to have fun in when I'm driving it. Sorry for being so long winded.
Later