• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Finally - ProCharger In!!!

  • Thread starter Thread starter 347Stroked95
  • Start date Start date Jun 30, 2004
3

347Stroked95

New Member
May 23, 2003
88
0
0
Loxahatchee, Florida
Jun 30, 2004
#1
  • Jun 30, 2004
  • #1
It finally made its way in. What a new monster, next thing to do is to get it down to DiabloSport for Chris Johnson and a little Dyno tuning. Oh and some Drag Radials The pulley that shipped with it should have made 11# on a stock motor, it only made 6. Just switched out to a 22# pulley and wonder what I'll see from that. 75-85 MPH area boost shoots to 14#s and rearend breaks free, load is gone and away goes the boost. Much needed front and rear suspension to come.....................maybe a 1/4 time.
 
R

rudeone707

New Member
May 17, 2003
1,829
0
0
Fairfield, Ca
Jun 30, 2004
#2
  • Jun 30, 2004
  • #2


looks good man. Hmm so the rear breaks loose at 80mph? Does it scare the **** out of you?
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Jun 30, 2004
#3
  • Jun 30, 2004
  • #3
I hate you j/k that thing must be real fun to drive, looks good and you should find out what it does on the track.
 
3

347Stroked95

New Member
May 23, 2003
88
0
0
Loxahatchee, Florida
Jun 30, 2004
#4
  • Jun 30, 2004
  • #4
rudeone707 said:


looks good man. Hmm so the rear breaks loose at 80mph? Does it scare the **** out of you?
Click to expand...

I wouldn't lie . I will admit the tires aren't in to good of shape, but yes it scares the crap out of me. I've probably only got on it a hand full of times and I'm still learning what the CAR wants to do I'm just there for the ride right now.
 

YEAHLOH95

Founding Member
Nov 19, 2001
1,249
3
39
EVERETT,PA
Jun 30, 2004
#5
  • Jun 30, 2004
  • #5
i can't imagine what that must feel like with regular tires . i couldn't drive mine with them, and i can't be making the power you are. i would put the bigger pulley back on til you get tuned just to be safe you never know .
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Jun 30, 2004
#6
  • Jun 30, 2004
  • #6
Mike I thought you had that thing on already. When are we going to Moroso? Afterwards we do shots, again.
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Jun 30, 2004
#7
  • Jun 30, 2004
  • #7
Mike it looks hot! Can you get a video up?
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 30, 2004
#8
  • Jun 30, 2004
  • #8
i am very close to breaking that commandment about coveting other people's stuff ... that thing must be a beast!
 

Sleepy McNastee

New Member
Feb 5, 2004
491
0
0
Lawrence, KS
Jun 30, 2004
#9
  • Jun 30, 2004
  • #9
347Stroked95 said:
It finally made its way in. What a new monster, next thing to do is to get it down to DiabloSport for Chris Johnson and a little Dyno tuning. Oh and some Drag Radials The pulley that shipped with it should have made 11# on a stock motor, it only made 6. Just switched out to a 22# pulley and wonder what I'll see from that. 75-85 MPH area boost shoots to 14#s and rearend breaks free, load is gone and away goes the boost. Much needed front and rear suspension to come.....................maybe a 1/4 time.
Click to expand...


Nice dude.It's good to see another Procharger in here.

I really want to upgrade to the D-1(It would be sooo easy)...and go 347 eventually...but I break loose in 3rd and thats crazy enough for now.

Let us know when you get a good boost reading too.I wanna see what a 22# pulley puts out with a high flow setup like yours. My 9# pulley makes 7-8#'s on my new setup, but I rev higher than before(which makes more boost) and I 'm guessing you do too.
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Jun 30, 2004
#10
  • Jun 30, 2004
  • #10
Good to hear Mike! I was wondering how the install was coming. I too thought you had it on already.
 

4Jenna

Founding Member
Sep 12, 2001
4,326
6
69
AZ
Jul 1, 2004
#11
  • Jul 1, 2004
  • #11
Nice!
 
1

1hot5.0

Founding Member
Sep 6, 2002
1,615
0
0
Surprise, Arizona
Jul 1, 2004
#12
  • Jul 1, 2004
  • #12
 

4Jenna

Founding Member
Sep 12, 2001
4,326
6
69
AZ
Jul 1, 2004
#13
  • Jul 1, 2004
  • #13
22#'s woah your my new idol
 
3

347Stroked95

New Member
May 23, 2003
88
0
0
Loxahatchee, Florida
Jul 1, 2004
#14
  • Jul 1, 2004
  • #14
VibrantRedGT said:
Mike I thought you had that thing on already. When are we going to Moroso? Afterwards we do shots, again.
Click to expand...

Yeah, it's been sitting in the garage for a long, long time, since September. I can't wait to get it tuned and to the track, but I don't know if I can get it past Tech inspection. If I do I might get 1 run before they throw me out .
Next step is to get the K and coil overs in along with the rear suspension to get this thing to plant.
 
3

347Stroked95

New Member
May 23, 2003
88
0
0
Loxahatchee, Florida
Jul 1, 2004
#15
  • Jul 1, 2004
  • #15
94SC50 said:
Mike it looks hot! Can you get a video up?
Click to expand...
Got a short idle/rev video, but no way to host it.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
40
98
MAINE
Jul 1, 2004
#16
  • Jul 1, 2004
  • #16
I came soooo close to getting a procharger but went w/ the Paxton insted. Let us know how it turns out, dyno #'s and what not. Looks good
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
For Sale 2000 GT Conv 4.6 block, heads lots of misc engine parts all removed,degreased, cleaned and inspected.
  • Tods Hot Rods
  • Sep 17, 2024
  • Engine and Power Adder Parts
Replies
3
Views
610
Engine and Power Adder Parts Sep 19, 2024
Tods Hot Rods
Y
400HP 2V N/A....Going back to my roots....
  • Yel2002GTAuto
  • Sep 26, 2022
  • SN95 4.6L Mustang Tech
  • 6 7 8
Replies
159
Views
28K
SN95 4.6L Mustang Tech Mar 11, 2025
Bullitt347
For Sale 1994 GT 5L Trickflow h/c/i Tremec TR3550 Saleen copy - $7000 (Ann Arbor, MI)
  • no_fox_given
  • Mar 21, 2019
  • SN95 Mustangs For Sale (1994-04)
Replies
3
Views
9K
SN95 Mustangs For Sale (1994-04) Mar 21, 2019
no_fox_given
S
For Sale 2003 Cobra Redfire Convertible
  • SpectorV
  • Feb 20, 2019
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
5K
SN95 Mustangs For Sale (1994-04) Feb 20, 2019
SpectorV
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?