Help me decide on cam, TB, intake, injectors

[colemanitis]

I'm looking at a new 306 w/ Performer RPM heads. I'm also going to get either a Novi 1000, or 2000. I'm needing help picking out some parts. Throttle body... 65mm, or 70mm? Which cam would work best with these heads? What size injectors... 24lb, or 30lb? Would I be better off matching these heads up with a Performer intake, or should I save some money and get a Trick Flow intake? Thanks in advance!

 

[Grn92LX]

42 lb injectors and get whatever TB matches the inlet of the manifold your using. Edelbrock perf and rpm intakes are 70mm opening and tfs are 75mm. I'd use an rpm intake and a 70mm TB. Or open up the inlet on the intake and run a 75mm. What cam you gonna use?

 

[colemanitis]

42 lb injectors and get whatever TB matches the inlet of the manifold your using. Edelbrock perf and rpm intakes are 70mm opening and tfs are 75mm. I'd use an rpm intake and a 70mm TB. Or open up the inlet on the intake and run a 75mm. What cam you gonna use?

Thanks for the reply! The motor comes with a stock cam, but I'll swap it if there's something that will make more power with the blower. Any suggestions?

 

[Grn92LX]

ed curtis custom, jay allen custom, buddy rawls custom, comp xe cams.. to name a few.

 

[colemanitis]

ed curtis custom, jay allen custom, buddy rawls custom, comp xe cams.. to name a few.

Thanks! Anybody else have feedback?