• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Progress Thread Hoopty v2.0 - It All Snowballed

  • Thread starter Thread starter hoopty5.0
  • Start date Start date Apr 15, 2019
Prev
  • 1
  • …
  • 67
  • 68
  • 69
  • 70
  • 71
  • …
  • 89
Next
First Prev 69 of 89 Next Last

AeroCoupe

lube between the nut and the face. I know my lubes
Founding Member
Oct 28, 2001
5,899
4,023
183
Claremore, OK
Mar 6, 2023
#1,361
  • Mar 6, 2023
  • #1,361
Maybe the solenoid on the inner apron is not working? Pull the red with blue strip wire off the solenoid and use a jumper wire from the battery over to that post and see if it starts. If not bad solenoid.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 6, 2023
#1,362
  • Mar 6, 2023
  • #1,362
AeroCoupe said:
Maybe the solenoid on the inner apron is not working? Pull the red with blue strip wire off the solenoid and use a jumper wire from the battery over to that post and see if it starts. If not bad solenoid.
Click to expand...
Yeah, I swapped that too.
 

AeroCoupe

lube between the nut and the face. I know my lubes
Founding Member
Oct 28, 2001
5,899
4,023
183
Claremore, OK
Mar 6, 2023
#1,363
  • Mar 6, 2023
  • #1,363
Have you checked the continuity of the start wire from the ignition switch to the solenoid?
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 6, 2023
#1,364
  • Mar 6, 2023
  • #1,364
AeroCoupe said:
Have you checked the continuity of the start wire from the ignition switch to the solenoid?
Click to expand...
No, hadn't worked on anything between the solenoid and ign switch yet. Ill try that next.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 6, 2023
#1,365
  • Mar 6, 2023
  • #1,365
Guys, today was one of those days at work - total terd sandwich. So, I was already in a bad mood.

Bought an ignition switch at lunch, went in put it in a few mins ago, still nothing. I got to thinking... What all controls the ability to start................................

Neutral safety switch.


I, being the brilliant person that I am was too lazy to order a plug for the trans where the NSS connects. I shoved a spade connector in there when I did the swap thinking "I'll order it later."

Of course, I forgot.

And so it fell out.

And I replaced every single other piece I could think of until that dim little bulb turned on. So, I wedged another spade connector in there and it roared to life.


I am my own worst enemy. Absolutely no help to my mood, either.
 
Reactions: RaggedGT, TOOLOW91 and Mustang5L5

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 6, 2023
#1,366
  • Mar 6, 2023
  • #1,366
Ok, Ive been doing some checking. It's not the NSS, I dont think. Its the reverse light harness, based on the photo of this plug and whats on LMR's site.
But, why does that keep the car from starting?! This was the plug that had the connecter wedged in it. The NSS is on the tailshaft housing and I have that, and its plugged in.
 
Last edited: Mar 6, 2023

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
Mar 6, 2023
#1,367
  • Mar 6, 2023
  • #1,367
The NsS is on the reverse light harness. It’s that red/blue jumper wire as the manual cars use a clutch safety and not an NSS.

So you do need that jumper intact.

Ar you confusing it with the NGS on top of the trans, because that does something different.
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 6, 2023
#1,368
  • Mar 6, 2023
  • #1,368
Mustang5L5 said:
The NsS is on the reverse light harness. It’s that red/blue jumper wire as the manual cars use a clutch safety and not an NSS.

So you do need that jumper intact.

Ar you confusing it with the NGS on top of the trans, because that does something different.
Click to expand...
Ah, ok. I ordered the harness for the reverse lights, pictured above. I should have it in a couple of days.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,115
21,288
234
Box behind Walmart
Mar 6, 2023
#1,369
  • Mar 6, 2023
  • #1,369
hoopty5.0 said:
Guys, today was one of those days at work - total terd sandwich. So, I was already in a bad mood.

Bought an ignition switch at lunch, went in put it in a few mins ago, still nothing. I got to thinking... What all controls the ability to start................................

Neutral safety switch.


I, being the brilliant person that I am was too lazy to order a plug for the trans where the NSS connects. I shoved a spade connector in there when I did the swap thinking "I'll order it later."

Of course, I forgot.

And so it fell out.

And I replaced every single other piece I could think of until that dim little bulb turned on. So, I wedged another spade connector in there and it roared to life.


I am my own worst enemy. Absolutely no help to my mood, either.
Click to expand...
You old fart. A week ago, I locked my keys in the Suburban. Great! Grabbed some coat hangers, looking around for a wedge when it hit me that I'd hidden a key on the body for [just] such an occasion. Forgot all about the damned thing... almost.

Dead brain cells are real
 
Reactions: hoopty5.0

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,934
10,575
203
polk county florida
Mar 6, 2023
#1,370
  • Mar 6, 2023
  • #1,370
Sometimes.....
No, most times......
Ok, almost every time the simple things cause the biggest headache.
Mine are mostly 'self inflicted '
 
Reactions: hoopty5.0

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,115
21,288
234
Box behind Walmart
Mar 6, 2023
#1,371
  • Mar 6, 2023
  • #1,371
Remember the mid-engine Mustang [thing] we saw? I already knew I'd be popping the engine bay looking for groceries.
 
Reactions: hoopty5.0

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,934
10,575
203
polk county florida
Mar 6, 2023
#1,372
  • Mar 6, 2023
  • #1,372
Noobz347 said:
Remember the mid-engine Mustang [thing] we saw? I already knew I'd be popping the engine bay looking for groceries.
Click to expand...
Now I'm hungry.
Thanks NOOBZ!
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,115
21,288
234
Box behind Walmart
Mar 6, 2023
#1,373
  • Mar 6, 2023
  • #1,373
General karthief said:
Now I'm hungry.
Thanks NOOBZ!
Click to expand...


Dude, I told you... Just make spicy potato soup!
 
Reactions: General karthief

AeroCoupe

lube between the nut and the face. I know my lubes
Founding Member
Oct 28, 2001
5,899
4,023
183
Claremore, OK
Mar 6, 2023
#1,374
  • Mar 6, 2023
  • #1,374
I didn’t think the NHS had anything to do with the start circuit? Thought it had to do with some idle strategy.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,485
8,706
234
S.I.NY
Mar 7, 2023
#1,375
  • Mar 7, 2023
  • #1,375
AeroCoupe said:
I didn’t think the NHS had anything to do with the start circuit? Thought it had to do with some idle strategy.
Click to expand...
manual cars had the jumper as pictured . Harness in the car plugs into pedals . There’s 4 wires . That’s where you’re thinking about idle . It gets the signal from it

The auto cars have a full harness at the trans and the jumper is at the pedal plug in the car
 

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 7, 2023
#1,376
  • Mar 7, 2023
  • #1,376
Once I get this in, Ill let the car warm up and re-set the valve lash.

Starting to warm up again. Can't wait to battle overheating again this summer!

I have a big iron in the fire right now with my wood side hustle. over the last year, I milled about 2,000 board feet of lumber and currently have about 1300 bf at the kiln being dried. The last weekend in March, I plan on having a big garage sale and selling basically anything I have that is dry and some that's not. The proceeds will hopefully pay off a big tool I just bought and then have enough left over to be seed money for a new motor. I have a couple projects lined up behind that and my hope is at the end of the summer, list the 302/turbo system as a pull out and sell that to have ~$10k set aside for a 351 based motor.

It's a big nut to crack and it's gonna need a lot of things to go right, but we'll push as hard as we can!
 
Reactions: slow84lx, bird_dog0347, Cheapskate207 and 1 other person

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Mar 7, 2023
#1,377
  • Mar 7, 2023
  • #1,377
Another reminder why I'm glad I decided to stay N/A. Thanks for the reassurance. Glad you figured out your starting issue, even tho it was a face palm moment.
 
Reactions: hoopty5.0

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 8, 2023
#1,378
  • Mar 8, 2023
  • #1,378
I wanted to update on the wheel situation - Once BC Forged got the whole story on my wheel fitment issue, they IMMEDIATELY jumped in and pledged to make it right through whatever means necessary, even if it mean making new wheels. The situation was resolved yesterday and as a customer, I'm happy with the outcome.

So, absolutely a stand up company that truly stands behind their products. I wouldn't hesitate to order from them again. That said, I would probably opt to spend a little more and order directly from them instead of an outside vendor to save a few bucks.
 
Reactions: RaggedGT, 90sickfox and bird_dog0347

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 9, 2023
#1,379
  • Mar 9, 2023
  • #1,379
Harness is in. Car starts.

Amazing what happens when the right things are plugged in to the right places.
 
Reactions: bird_dog0347, Olivethefet, 95BlueStallion and 2 others

hoopty5.0

mechanicus terribilis
15 Year Member
Dec 14, 2010
7,786
6,939
214
SW Houston
Mar 13, 2023
#1,380
  • Mar 13, 2023
  • #1,380
And as soon as it ran again, it died.

I adjusted the noisy rocker, same one was loose. Started it and ran in the garage for 10-ish mins and all was good. Went for a ride and it died outside my neighborhood. Spent some time yesterday troubleshooting only to find that the Megasquirt seems to have been fried.

What I think happened is I forgot to tighten the + battery cable. It arced and fried the MS somehow. I can't prove it but that's what I think happened. When the car died, all power shut off. Wiggled the cable and everything came back on.

Unsure what my next move is now. Need to get to the end of the month and get a few things behind me and see what funding looks like.
 
Reactions: 90sickfox and RaggedGT
Prev
  • 1
  • …
  • 67
  • 68
  • 69
  • 70
  • 71
  • …
  • 89
Next
First Prev 69 of 89 Next Last
You must log in or register to reply here.

Similar threads

J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
350
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?