Hows this setup sound?

F

FNG95gt

New Member

May 16, 2006

14

0

0

Jan 10, 2007

#1

• Jan 10, 2007

• #1

306,w/forged Pistons,stock Crank And Rods.holley Systemax Heads W/1.6 Roller Rockers .ford Motorsports Intake (cobra ) 65mm throttle body, bbk cold air intake .adjustable fuel regulator Steeda 19 Cam And Lifters.msd Pro Billet Dis.,msd coil. Jba Shorties,h- Pipe, And Flowmastersw/dumps.the Tranny Is An Aod That Was Gone Through And Upgraded with a shift kit,and It Has A 3200 Stall.3.73 Gears out back....all in a 95' gt.
also how do you think the car will run after this??? times.

 

earleys94gt

Active Member

Aug 31, 2003

1,223

16

49

Ashley, Ohio

Jan 10, 2007

#2

• Jan 10, 2007

• #2

Sounds awesome! Might get a drone from the dumped Flows, if you don't care...
I have also heard that the Holley Systemax heads have an exhaust port slightly higher than stock, so you need to make sure that you select the right headers...I could be wrong on that though...

 

F

FNG95gt

New Member

May 16, 2006

14

0

0

Jan 10, 2007

#3

• Jan 10, 2007

• #3

anyone else?

 

mustang6tee8

Member

Jul 19, 2005

375

0

17

College Station, TX

Jan 11, 2007

#4

• Jan 11, 2007

• #4

Sounds envious!

I'm guessing you'll run low 13's. Remember- it's just a guess.

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 11, 2007

#5

• Jan 11, 2007

• #5

sounds well thought out. i would port the lower though and i don't know much about that cam, but it looks more like a blower cam with the 115* lsa. you might consider the #18 instead for something a little more agressive (or in other words, a little better for a n/a engine, unless you plan on strapping on a blower later ...)

 

ProKiller

Founding Member

Apr 26, 2002

3,064

15

78

PA

Jan 11, 2007

#6

• Jan 11, 2007

• #6

i would look into a different intake. those heads will do better with the systemax intake

 

Black95GTS

Active Member

Jan 8, 2004

1,644

3

38

Marlborough, MA

Jan 11, 2007

#7

• Jan 11, 2007

• #7

1 - Go hotter on the cam as mentioned above.
2 - If you don't port the Cobra, I think its a bottleneck
3 - I think you need more gear, like 4.10s minimum
4 - 75mm TB
5 - At least 24 lb injectors
6 - You're gonna need to tune it
7 - Why forged pistons? Are you gonna boost it?
8 - You might want to step up to a larger MAF as well

Adam

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Jan 11, 2007

#8

• Jan 11, 2007

• #8

yeah, you will definately want to get a tune

 

F

FNG95gt

New Member

May 16, 2006

14

0

0

Jan 13, 2007

#9

• Jan 13, 2007

• #9

Black95GTS said:

1 - Go hotter on the cam as mentioned above.
2 - If you don't port the Cobra, I think its a bottleneck
3 - I think you need more gear, like 4.10s minimum
4 - 75mm TB
5 - At least 24 lb injectors
6 - You're gonna need to tune it
7 - Why forged pistons? Are you gonna boost it?
8 - You might want to step up to a larger MAF as well

Adam

Click to expand...

and the intake has been ported and polished upper and lower....and im thinkin i may swap it to 4.30 gears...
the reason for that cam, is ive been told its good for spray and forced induction, which is some stuff i would like to have in the very near future..
i got a 70mm throttle body i could throw on there.
and i got matching mass air for the throttle body,

 

F

FNG95gt

New Member

May 16, 2006

14

0

0

Jan 14, 2007

#10

• Jan 14, 2007

• #10

anybody else?

 

OrangeMustangGt

Founding Member

Mar 7, 2002

1,976

0

36

Cape Cod, MA

Jan 15, 2007

#11

• Jan 15, 2007

• #11

i agree....get a better intake.

also.....good idea going forged pistons....its not really that much more$$


at least get a 70mm tb....dont want to choke it off

 

ProKiller

Founding Member

Apr 26, 2002

3,064

15

78

PA

Jan 15, 2007

#12

• Jan 15, 2007

• #12

matching TB and Maf? never heard of doing that. you have to match the maf with the injectors and thats about it.

+1 on the 24# injectors, i would get a 80mm Pro-M maf if it was me. Also a 255lph fuel pump should be on your list.

 

F

FNG95gt

New Member

May 16, 2006

14

0

0

Jan 15, 2007

#13

• Jan 15, 2007

• #13

ProKiller said:

matching TB and Maf? never heard of doing that. you have to match the maf with the injectors and thats about it.

+1 on the 24# injectors, i would get a 80mm Pro-M maf if it was me. Also a 255lph fuel pump should be on your list.

Click to expand...

ya, its just what i have, thats bigger. lol....but i guess ill have to invest in some injectors, and already got the fuel pump..

 

F

FNG95gt

New Member

May 16, 2006

14

0

0

Feb 13, 2007

#14

• Feb 13, 2007

• #14

anyone else?

 

F

FNG95gt

New Member

May 16, 2006

14

0

0

Apr 5, 2007

#15

• Apr 5, 2007

• #15

bump back to the top.....well i got the systemax intake now and a bbk 75mm TB 90mm granatelli MAF with matching 24lb inj.