induction combo

[deggy67]

I am building a 331 with 10.5-1 Comp a Comp Cams XE274HR cam and AFR 185 Heads. I have Long tube BBk 1 5/8 headers and 2 1/2 exhaust all the way out. I need an injection top end and I am not sure what to buy. Here is what I was thinking about:
1. TFS Track Heat or TFS R (not box style) intake, I was also considering a Perf. RPM II.
2. 75mm TB
3. Not sure what size MAF to go with
4. 30lb injectors
5. anderson power pipe

I would appreciate any input as far as whether I am on the right track or way off base, a suggestion on MAF size would be great, also if anyone has a combo similar I would like to know what kind of power are you making and how does it drive.

 

[fish254]

i would go with the performer rpm 2 and pro m 80 mass air go with 42 lb injectors just in case u want to add may be nitrous down the road

 

[TheRedBlur]

agree'd, RPMII is a great manifold, pro-m is good quality, dunno about the 42 lbs though, pintle might be too big. not a big issue though