• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

INjector SIze HElp

  • Thread starter Thread starter black87ttop
  • Start date Start date Feb 12, 2008

black87ttop

Member
Oct 29, 2007
43
2
8
burlington,new jersey
Feb 12, 2008
#1
  • Feb 12, 2008
  • #1
Hey guys got a question for ya bout injectors? I came across a deal for some 32lb injectors with matching pmas. I need to know if they will be suitable for my combo.

Right now i have a set of 24's and i think they will be to small for the new build. Tell me what you think

mexican block
347 stroker
edel. alum heads 1.9 and 1.6
dont remember cam specs somewhere in the 590in/600 ex range
edel. upper and lower
bbk adj fuel reg
255 fuel pump
edel. 100 maybe 125 shot nitrous , but its a wet kit, so it doesnt rely on injectors, supply's it own fuel.
Lontbubes
built aod
I think thats it.


whatchya think?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 12, 2008
#2
  • Feb 12, 2008
  • #2
Injector HP ratings: divide flow rating by.5 and multiply the result by the number of injectors. This uses a 100% duty cycle. These ratings are for naturally aspirated engines.

Example:
19/.5 = 38, 38 x 8 = 304 HP
24/.5 = 48, 48 x 8 = 384 HP
30/.5 = 60, 60 x 8 = 480 HP

The preferred duty cycle is about 85% maximum, so for a safety factor multiply the final figure times .85.

304 HP x .85 = 258 HP
385 HP x .85 = 326 HP
480 HP x .85 = 408 HP

Remember that the above ratings are at 39 PSI. Increasing the pressure will effectively increase the flow rating. Example: a 19 lb injector will flow 24 lbs at 63 PSI, and a 24 lb injector will flow 30 lbs at 63 PSI.

See http://users.erols.com/srweiss/ to get the calculators used in these examples.

Here's the duty cycle explanation. Duty cycle is how much of the time the intake is open the injectors are turned on. The 85% figure means that for 85% of the time the intake valve is open, the injectors are spraying. The idea is that you want some percentage of the duty cycle left over so that you have some room to grow the process.

If you are at 100% and you need more fuel, all you can do is turn up the fuel pressure. That means the whole fuel curve from idle to WOT is affected. Maybe you are already too rich at idle, and turning up the fuel pressure makes it worse. If you had some injector duty cycle left to play with, a custom tune could use that where it is needed. That would not over richen the whole range from idle to WOT.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Feb 12, 2008
#3
  • Feb 12, 2008
  • #3
get the bigger injectors and up your pressure to 42
 

black87ttop

Member
Oct 29, 2007
43
2
8
burlington,new jersey
Feb 12, 2008
#4
  • Feb 12, 2008
  • #4
bigger as in?

Im selling the 24's cuz i believe they will be less than adequate.

My main question is whether the 32's will be sufficient.
thanks again
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 13, 2008
#5
  • Feb 13, 2008
  • #5
If you look carefully at the figures I posted ,you will find that 24 lb injectors will be fine.

It is very unlikely you will make more than 408 HP on a street/strip tuned 347 without a power adder. Since your NO2 has its own fuel nozzle and does not use the injectors to supply fuel, it does not require bigger injectors.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Feb 13, 2008
#6
  • Feb 13, 2008
  • #6
You need the 30's. Thats what i'm running on my 347 ( a bit more wilder than yours) and they're near maxed out up top I didn't find that out by doing a math equation, I found out in the real world looking at the duty cycle on my PMS
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Feb 13, 2008
#7
  • Feb 13, 2008
  • #7
go 30's or the 32's you posted
 

black87ttop

Member
Oct 29, 2007
43
2
8
burlington,new jersey
Feb 13, 2008
#8
  • Feb 13, 2008
  • #8
K i will go for the 32's thanks for the input guys
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
New 347 EFI stroker won’t idle
  • hankth18
  • Mar 29, 2022
  • 1994 - 1995 Specific Tech
Replies
11
Views
3K
1994 - 1995 Specific Tech Apr 9, 2022
revhead347
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
14K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
first time 331 build
  • rademf64
  • Jun 6, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 14, 2019
Monkeybutt2000
M
T
Foxbody Please Help! Injector Size?
  • Tim Steel
  • Dec 7, 2015
  • Fox 5.0 Mustang Tech
Replies
16
Views
11K
Fox 5.0 Mustang Tech Jan 13, 2016
A5literMan
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?