I decided to drastically change my interior. After pulling my center console (with broken mounting tabs), i went to town cutting out some bracing that was under the head unit. It appeared to just be a mounting location for some Mach 460 equipment, but turns out it greatly supports the dash. I wanted the new carpet to lay up under the dash, but now my steering wheel bounces a bit when I hit bumps. I can see my whole dash shimmy when hitting bumps actually. I will weld a couple little braces underneath to resolve the problem, but thought I would share incase anyone decides to get crazy and redesign their interior like i did. Im still planning new seats and a different steering wheel to complete the changes. My camera sucks, and the car was in my garage, so I apologize for the low quality pics.
Then I decided to try the new 5.0 emblems, and it turns out our front fenders have two holes under the stock GT badges, and the only way to cover them both would put the badges way out of place. So now I have a little hole showing, but you dont notice it from a distance... The big hole in the fender is under the bottom right corner of the 5.
Then I decided to try the new 5.0 emblems, and it turns out our front fenders have two holes under the stock GT badges, and the only way to cover them both would put the badges way out of place. So now I have a little hole showing, but you dont notice it from a distance... The big hole in the fender is under the bottom right corner of the 5.