LMR Youtube Channel

Ford Wiring Diagrams Made EASY! USB Flash Drive or Paperback | Mustang, Bronco, & F-series Truck

View: https://www.youtube.com/watch?v=IyicIYmC-V4


These wiring diagrams should be in your cabinet or drawer at home. An electrical and vacuum troubleshooting manual can be a life saver when trying to figure out issues with your vehicle. We offer several Ford diagrams for vehicles that we service such as: Fox Body Mustang, SN95 Mustang, New Edge Mustang, OBS Bronco & F-150, and 10th generation F-150. Due to the limitations of the print company, some paperback copies are not available.

*Product Links*
Shop All Wiring Diagrams: https://lmr.parts/automotive-guides-books-literature

*Watch*
LMR Metal Wall Art Vehicle Silhouettes: View: https://youtu.be/jpAeN0RwqlI


*Vehicle Fitment*
Chassis: Fox Body, SN95, & New Edge Mustang | OBS Bronco & F-series Truck | Lightning/F-150
Year Range: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

*Chapters*
00:00 - Video intro & explanation.
01:30 - USB wiring diagram overview.
05:08 - Final thoughts & outro.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #ford #wiringdiagram

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Down to Business! Coyote Swap New Edge How To Guide - Start to Finish | Project Keeping Comp

View: https://www.youtube.com/watch?v=mIC6f5kXPHc


In this video, we Coyote Swap our 2004 New Edge Mustang GT Project Car; Keeping Comp. Ever since we fixed the car we were unsure on where we wanted to be with the engine. Like anything, there's several ways to go about doing this. As cool as a 2-valve build would have been, we landed on a gen 2 Coyote engine from a wrecked Mustang GT.

This video covers the entire process from start to finish and touches base on popular FAQs with the swap. Such as wiring the factory gauges, wiring the a/c, and installing the Ford Performance control pack.

*Product Links*
94-04 Mustang Coyote Swap Parts: https://lmr.parts/coyote-engine-swap-parts-94-04
SVE Coyote Swap Shorty Headers: https://lmr.parts/SVE-9604CS-K
SVE Coyote Swap Fuel System: https://lmr.parts/SVE-9350H-K

*Watch*
Project Keeping Comp Resto Master Cut: View: https://youtu.be/OC5LdW73LbM

Keeping Comp Coyote Swap Dyno: View: https://youtu.be/0XbeNd4V0FY

SVE Coyote Swap Fuel System Install: View: https://youtu.be/b_RXz-ayGCk

SVE Coyote Swap Shorty Headers: View: https://youtu.be/TCwYRmoT2ok

Coyote Pulse Ring Explanation: View: https://youtu.be/4gOjjhcggGU

Coyote Rear Main Seal Replacement: View: https://youtu.be/KcR4XFmsNEc


*Vehicle Fitment*
Chassis: SN95 & New Edge Mustang
Year Range: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

*Chapters*
00:00 - Video intro & explanation.
02:50 - Removing the factory engine.
06:17 - What to look for when buying an engine?
10:48 - Modifying the factory transmission harness.
19:01 - How to make the factory gauges work? Part 1
20:44 - Coyote engine prep.
29:08 - Mocking up the crate engine harness & sensors.
33:20 - Cleaning the engine bay & other misc stuff.
35:29 - Installing the Coyote engine.
42:19 - How to make the factory gauges work? Part 2
44:28 - Situating the crate engine harness & battery cable modification.
50:19 - Build an alternator & fuse box power wire.
53:53 - Installing the accelerator pedal.
59:48 - Fuel pump driver module modification & control pack wiring.
1:05:57 - Engine bay finish out.
1:10:51 - Check for oil pressure.
1:12:03 - Reinstalling take-off parts & final once-over.
1:14:57 - Dyno & final thoughts.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #coyoteswap #newedgemustang

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Sorry, no more 2V in the New Edge! Keeping Comp has been Coyote swapped! #latemodelresto #shorts

View: https://www.youtube.com/watch?v=w82OacHgJl0


Sorry, no more 2V in the New Edge! Keeping Comp has been Coyote swapped! #latemodelresto #shorts

If you’re looking to Coyote swap your New Edge Mustang, we’ve got you covered! #latemodelresto

View: https://www.youtube.com/watch?v=-tOQO7rkD6c


If you’re looking to Coyote swap your New Edge Mustang, we’ve got you covered! #latemodelresto

Here are the dyno results of the Gen 2 Coyote Swap from Project Keeping Comp! #latemodelresto

View: https://www.youtube.com/watch?v=5cgqWewrBVs


Here are the dyno results of the Gen 2 Coyote Swap from Project Keeping Comp! #latemodelresto

How long do you think the whole swap process took? Let’s hear your guesses! #latemodelresto #shorts

View: https://www.youtube.com/watch?v=CiTHVOwRq4o


How long do you think the whole swap process took? Let’s hear your guesses! #latemodelresto #shorts

Another “employee car show” this Friday! Pick your favorite from the lineup! #latemodelresto #shorts

View: https://www.youtube.com/watch?v=CMKOE2--MGI


Another “employee car show” this Friday! Pick your favorite from the lineup! #latemodelresto #shorts

1987-1993 Fox Body Mustang: 5.0 Resto Upper Hatch Trim Panel - Overview & Install

View: https://www.youtube.com/watch?v=Z9xFfBFhi6M


Renew the interior hatch area of your 1987-1993 Fox Body Mustang with 5.0 Resto's upper hatch trim panel. This trim panel is designed and manufactured with a factory fit and finish in mind. With the help of computer-aided design (CAD), this panel features factory dimensions and tolerances for an effortless installation. Constructed from durable plastic, all mounting screw standoffs and clip retainers are molded in the correct locations. You'll even notice the small cutouts for the defrost wiring. Attention to detail goes a long way! Factory-style grain and texture are applied to closely match the rest of your interior. This trim panel is available in black or a neutral gray. The neutral gray is close to opal gray, but there is a small difference. We recommend prepping and painting the gray panel to match your interior color. Installation hardware is included.

*Product Links*
Black Upper Hatch Trim Panel: https://lmr.parts/LRS-46404BK
Gray Upper Hatch Trim Panel: https://lmr.parts/4hC9LPA
LMR Interior Paint: https://lmr.parts/79-93-Mustang-Interior-Paint-Spray-Dye
Adhesion Promoter: https://lmr.parts/SEM-39863
Shop Hatchback Parts: https://lmr.parts/79-93-mustang-hatch-truck-components

*Watch*
87-93 Center Console: View: https://youtu.be/MVUijkDLmgI

87-93 Armrest Bases: View: https://youtu.be/VjAWcUmPUGE


*Vehicle Fitment*
Chassis: Fox Body
Year Range: 1987, 1988, 1989, 1990, 1991, 1992, 1993

*Tool List*
Microfiber Towels
Waterless Wash Product
Phillips Head Screwdriver
Push Pin Removal Tool
Gray Scuff Pads
Dish Soap
Bucket
Compressed Air
PPE (mask, gloves, etc.)
Adhesion Promoter
LMR Interior Paint

*Torque Specs*
Screws - Hand Tight

*Chapters*
00:00 - Hatch trim panel overview.
01:51 - Paint process.
02:17 - How to install the upper hatch trim panel.
03:07 - Final thoughts & outro.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #foxbody #carrestoration

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Mild to WILD! Vortech Supercharged Gen 3 Coyote Dyno - 2022 Mustang GT

View: https://www.youtube.com/watch?v=-brFk9mvLKY


Vortech 2022 Mustang GT Dyno

*Product Links*
S550 Superchargers: https://lmr.parts/S550-Mustang-Supercharger-Kits
DHP1 Wheels: https://lmr.parts/mustang-sve-dhp1-wheels

*Watch*

2022 Ford Mustang GT: View: https://youtu.be/maae8xbdJzc

Positive Displacement vs Centrifugal Supercharger: View: https://youtu.be/OU0Qg5faR0k


* 2022 Mustang GT Dyno Info*
- Gen 3 Coyote
- Vortech V3 JT Kit (~8psi)
- Long Tube Headers w/ Free Flowing Mid Pipe (dyno use only)
- SVE Resonator Delete X-pipe
- Factory Active Exhaust
- Stock 2-piece Driveshaft
- 10R80 Transmission
- 3.15 Rear Gear
- 325/30/19 Nitto NT555 G2 Tire
- Custom Tune
- 93 Octane Fuel

*Chapters*
00:00 - Video intro & vehicle specs.
02:11 - Dyno run.
02:28 - Dyno results.
05:37 - Final thoughts & outro.


*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #mustang #dyno

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Removing the factory 4.6L 2V from our 2004 New Edge Mustang #latemodelresto #shorts

View: https://www.youtube.com/watch?v=h2hz56PcQrI


Video Description

*Product Links*

*Watch*

*Vehicle Fitment*

*Tool List*

*Torque Specs*

*Chapters*

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr # # (3 Hashtags)

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Ford OBS Bronco & Truck: How To Install Latch Cable & Inner Door Handle

View: https://www.youtube.com/watch?v=2KLIBs8ngpM


Ford OBS Bronco & Truck: How To Install Latch Cable & Inner Door Handle

*Product Links*
OBS Bronco Door Parts: https://lmr.com/products/1992-1996-ford-bronco-interior-door-parts
OBS Truck Door Parts: https://lmr.com/products/ford-lightning-interior-door-93-95

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #fordbronco #carrestoration

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

We've ALL been there! What to look for when buying a used engine? | Basic Checks to Consider

View: https://www.youtube.com/watch?v=5hb_Rzx4Um8


If you've purchased a used engine, then you know it's always some kind of dice roll. Regardless of how well the ad is put together, there is that underlying feeling of, "man, I hope this is legit". Recently, we purchased a used gen 2 Coyote engine with low miles (30-40k) from out of state. What we thought was a good deal, turned into a not so good deal. The engine we bought had isolated damage to several components that forced us to spend more money than what we wanted to. This is a friendly reminder to perform your due dilligence when buying anything used; especially an engine!

*Product Links*
Shop Engine Parts: https://lmr.com/

*Watch*
Keeping Comp Coyote Swap: View: https://youtu.be/mIC6f5kXPHc

Positive Displacement vs Centrifugal Supercharger: View: https://youtu.be/OU0Qg5faR0k


*Chapters*

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #engine #fordmustang

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

We had A LOT of issues when we decided to Coyote swap the New Edge #latemodelresto #shorts

View: https://www.youtube.com/watch?v=eR34xqlHGTs


We had A LOT of issues when we decided to Coyote swap the New Edge #latemodelresto #shorts

1987-1993 Fox Body Mustang: 5.0 Resto Headlight Relay Harness - Overview & Install

View: https://www.youtube.com/watch?v=pk6BNBnpRfM


From the factory, there was a slight overload on the headlight circuit that, over time, can cause serious damage to the headlight switch connecter that plugs into the back of the headlight switch due to the large amp draw. The connector can melt, which can cause damage to the switch, dash wiring, and intermittent headlight function. Well, thanks to 5.0 Resto, you no longer have to worry about that; the headlight relay harness will prevent this issue in the future. The 5.0 Resto headlight relay harness shifts the load away from that connector into two relays, one for the low beam and one for the high beams. Reducing amp draw anywhere from 5-10 amps per circuit greatly decreasing the demand on the factory wiring. Regardless of whether you have good factory wiring, are doing a mild restoration, or are just working on making your Fox Body further updated, this harness is a fantastic option for your Mustang. We believe every single 1987-1993 Mustang needs this harness as this is how it should have been wired from the factory.

You'll need to source a nut to secure the relay to the fender support bracket.

*Product Links*
87-93 Headlight Relay Harness: https://lmr.parts/LRS-14489-HR
Fox Body Exterior Lighting: https://lmr.parts/79-93-Mustang-Exterior-Lighting

*Watch*
Fox Body Front Bumper Removal: View: https://youtu.be/7tJwJrcQyaA

Headlight Switch Replacement: View: https://youtu.be/qUPqhW6wnq8


*Vehicle Fitment*
Chassis: Fox Body
Year Range: 1987, 1988, 1989, 1990, 1991, 1992, 1993

*Notes*
You'll need to source a nut to secure the relay to the fender support bracket.

*Chapters*
00:00 - Headlight harness overview.
01:54 - Other parts to consider.
02:41 - Amp draw comparison.
03:35 - How to install the harness.
06:00 - Final thoughts & outro.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #foxbodymustang #carrestoration

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Ford OBS Bronco & Truck: Reproduction A-pillar Trim - Overview & Install

View: https://www.youtube.com/watch?v=1p430fvFdPQ


Replace your warped, cracked, or broken 1992-1996 Ford OBS Bronco and truck a-pillars with these brand new gray units from LMR. Whether you're taking on a project with missing a-pillars or need to replace your originals that are cracked in several places, these LMR a-pillars are the perfect interior restoration item. Your a-pillars take some abuse over the decades from multiple installations and removals, drilled for gauges, resulting in broken mounting points, scuffs, scrapes, cracks, and unrepairable damage. LMR identified the need for replacement a-pillar trims for your OBS truck and is proud to offer this new pair to help restore your interior!

Designed and manufactured with an OEM fit and finish in mind, these LMR a-pillar trims are the perfect solution to restore your interior. Each trim is built to the factory dimensions with durable plastic material using an injection molding process. Factory-style grain and texture are applied to closely match the rest of your interior. LMR's a-pillar trims arrive in a gray finish but can be prepped and painted to match other interior colors. Each A-pillar trim features the correct counter-sunk mounting screw locations along with the back reinforcement gussets that run the length of the pillar. Lastly, at the bottom is the plastic welded boss for the lower attaching point that is wrapped in foam to prevent rattles.

*Product Links*
92-96 Bronco A-pillar Trim: https://lmr.parts/FTP-3598A
93-95 Lightning A-pillar Trim: https://lmr.parts/LTP-3598A
Bronco Interior Paint: https://lmr.com/products/1992-1996-ford-bronco-interior-paint
Lightning Interior Paint: https://lmr.com/products/ford-lightning-paint-93-95
Adhesion Promoter: https://lmr.parts/SEM-39863

*Watch*
OBS Ford Truck Steering Wheel: View: https://youtu.be/Mp6_AW5Ftrk

OBS Ford Truck Dash Pad: View: https://youtu.be/NaGdy4wT6Tg


*Vehicle Fitment*
Chassis: OBS Bronco, OBS F-150 Lightning
Year Range: 1992, 1993, 1994, 1995, 1996

*Tool List*
Microfiber Towels
Waterless Wash Product
Phillips Head Screwdriver
Gray Scuff Pads
Dish Soap
Bucket
Compressed Air
PPE (mask, gloves, etc.)
Adhesion Promoter
LMR Interior Paint

*Torque Specs*
Interior Screws - Hand Tight

*Chapters*
00:00 - A-pillar trim overview.
01:33 - Paint process.
02:49 - How to install the a-pillar trim.
03:49 - Final thoughts & outro.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #obsford #carrestoration

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Competition Orange lineup! Which one is your favorite? #latemodelresto #shorts

View: https://www.youtube.com/watch?v=GubMHjkXWsI


Competition Orange lineup! Which one is your favorite? #latemodelresto #shorts

S550 Mustang takes on COTA! Build Breakdown & In-car Footage

View: https://www.youtube.com/watch?v=crPEgEDOsD4


S550 Mustang takes on COTA! Build Breakdown & In-car Footage

*Product Links*
SVE DHP1 Wheels: https://lmr.parts/mustang-sve-dhp1-wheels
Ford Performance Camber Plates: https://lmr.parts/M18183MDH
Ford Performance Track Lowering Springs: https://lmr.parts/M5300YA
Ford Performance Track FR3 Shock/Strut Kit: https://lmr.parts/M18000F
Ford Performance Side Exit Exhaust: https://lmr.parts/M5220M8
Tow Hook: https://lmr.parts/ZL1-04154121
S550 Mustang Brake Parts: https://lmr.com/products/2015-Mustang-Brakes

*Vehicle Modifications & Accessories*
Garmin Catalyst
SVE Forged DHP1 Wheels (19x10.5" front, 19x11" rear)
Michelin Cup 2 Tires (305/30/19 front, 315/30/19 rear)
Ford Performance FR3 Shock/Struts
Ford Performance Track Lowering Springs
Ford Performance Dark Horse Camber Plates
Ford Performance Stage 3 Power Pack ( GT350 intake, throttle body, cai, & Ford calibration)
Ford Performance "Boss 302 Style" Side Pipes & Resonator Delete
OEM PP1 Calipers/Rotors
Hawk HP+ Brake Pads
Tow Hook

*Car Specs*
2015 Mustang GT
Competition Orange
Performance Pack 1 (PP1) Package
6-speed Manual MT82 Transmission
~97k miles

*Watch*
VR 360° Onboard Racing | 2015 Mustang GT at Hallett Motor Racing Circuit: View: https://youtu.be/pHfCq5teRi8

Gen 2 Coyote P0300 & P0308 misfire codes SOLVED! Does it affect Power? Fix w/ Dyno Results: View: https://youtu.be/UEhVRxMBYgw


*Chapters*
00:00 - Intro & build breakdown.
08:15 - Session 1
11:53 - Session 2
29:36 - Session 3
49:46 - Session 4

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #s550mustang #racing

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Throwback to the HAWT BOXXX! Happy April Fools! #latemodelresto #shorts

View: https://www.youtube.com/watch?v=7Kd9F_533PU


Throwback to the HAWT BOXXX! Happy April Fools! #latemodelresto #shorts

Ford OBS Bronco: How To Change Oil - Full Process

View: https://www.youtube.com/watch?v=bAGvOLjNuj0


We're adding to our oil change videos, again. In this video, Landan shows the process of how to change the oil in a 1992-1996 OBS Ford Bronco. This process works for 5.0L and 5.8L Broncos.

*Product Links*
Bronco Oil System Parts: https://lmr.com/products/1992-1996-ford-bronco-oil-system-pan-pump

*Watch*
Ford OBS Truck Replacement A-Pillar Trim: View: https://youtu.be/1p430fvFdPQ

Ford OBS Truck Factory-style Replacement Steering Wheel: View: https://youtu.be/Mp6_AW5Ftrk


*Tool List*
Lift or Jack & Jack Stands
Microfiber Towels
Cardboard, Aluminum Foil, or Form-a-funnel
Brake Clean
3/8" Socket Wrench
3/8" Socket Set
3/8" Torque Wrench

*Torque Specs*
Drain Plug - 15-25 lb-ft (preferably 15-20 lb-ft)

*Chapters*
00:00 - Video intro & explanation.
02:10 - Lift the vehicle & drain the oil.
04:16 - Draining the oil.
03:08 - Clean the drain plug & reinstall it.
06:03 - Prep the new oil filter.
07:21 - Remove the old oil filter & install the new filter.
12:01 - Open the hood & fill the engine with oil.
14:42 - Checking the dip stick for the oil level.
15:50 - Final thoughts & outro.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #obsford #fordbronco

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Gen 2 Coyote Swap New Edge Mustang Makes Great Power! - Keeping Comp Dyno

View: https://www.youtube.com/watch?v=0XbeNd4V0FY


Gen 2 Coyote Swap New Edge Mustang Makes Great Power! - Keeping Comp Dyno

*Product Links*
94-04 Mustang Coyote Swap Parts: https://lmr.parts/coyote-engine-swap-parts-94-04
SVE Coyote Swap Shorty Headers: https://lmr.parts/SVE-9604CS-K
SVE Coyote Swap Fuel System: https://lmr.parts/SVE-9350H-K

*Watch*
Project Keeping Comp Resto Master Cut: View: https://youtu.be/OC5LdW73LbM

Keeping Comp Coyote Swap How To Guide: View: https://youtu.be/0XbeNd4V0FY


*Dyno Information*
- Gen 2 Mustang GT Coyote Engine
- SVE Coyote Swap Shorty Headers
- Bassani High-flow Mid-pipe
- Borla XR-1 Mufflers
- TR3650 Transmission (4th gear is the 1:1 ratio)
- Aluminum Driveshaft
- 3.73 Rear Gear
- 285/35/18 Nitto NT555 G2 Tires
- DIY Cold Air Intake w/ Factory MAF Housing
- Ford Performance Calibration

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #mustang #dyno

Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer