Mine is from a 75 II with v8. A friend of mine put close to 50k on this fork back in the 80's. When he blew the engine I snatched his trans. I have it working in my setup today. Try to locate one of these.
Mine sits 2/3 forward in the opening so mine may have been bent over the years. This tells me a fox one isn't too far off.
I swear I've read the fox fork worked. I just cannot find it again. If you can weld you should be able to bend the fox fork to match. If not it was minor modifications to the pivot to make it work. They are 30 bucks new so worth it in my mind to get one and mock it up. Just get the adjustable pivot as well.
Mine sits 2/3 forward in the opening so mine may have been bent over the years. This tells me a fox one isn't too far off.
I swear I've read the fox fork worked. I just cannot find it again. If you can weld you should be able to bend the fox fork to match. If not it was minor modifications to the pivot to make it work. They are 30 bucks new so worth it in my mind to get one and mock it up. Just get the adjustable pivot as well.